|本期目录/Table of Contents|

[1]胡 斌,刘海涛,聂健壕,等.基于LabVIEW分数阶控制器的机械臂控制[J].工业仪表与自动化装置,2018,(03):11-15.[doi:1000-0682(2018)03-0000-00]
 HU Bin,LIU Haitao,NIE Jianhao,et al.Control of mechanical arm based on LabVIEW fractional order controller[J].Industrial Instrumentation & Automation,2018,(03):11-15.[doi:1000-0682(2018)03-0000-00]
点击复制

基于LabVIEW分数阶控制器的机械臂控制

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:
期数:
2018年03期
页码:
11-15
栏目:
出版日期:
2018-06-15

文章信息/Info

Title:
Control of mechanical arm based on LabVIEW fractional order controller
作者:
胡 斌刘海涛聂健壕孙 健
广东海洋大学,广东 湛江 524003
Author(s):
HU Bin LIU Haitao NIE Jianhao SUN Jian
Guangdong Ocean University, Guangdong Zhanjiang 524003, China
关键词:
机械臂分数阶控制器CompactRIO
Keywords:
mechanical armfractional orderCompactRIO
分类号:
TP241.2
DOI:
1000-0682(2018)03-0000-00
文献标志码:
A
摘要:
针对机械臂存在着参数摄动和外界干扰等不确定性,提出一种基于LabVIEW分数阶控制器的机械臂控制方法,以提高机器人的跟踪控制精度和鲁棒性。在CompactRIO智能实时控制器和机箱的基础上利用NI9401对伺服电机的编码器信号进行采集处理,LabVIEW软件编程控制NI9263输出模拟电压信号到伺服驱动器实现电机的力矩控制,算法采用分数阶PD控制器实现二自由度机械臂高速和高精度的运动控制,通过实验说明了该方法的工程有效性和可行性。
Abstract:
Aiming at the parameter perturbation and external interference uncertainly in the control of mechanical arm , in order to improve the tracking control accuracy and robustness of robot a control method based on the LabVIEW fractional order is proposed. On the basis of CompactRIO smart real-time controller, using NI9401 to collect the signal of the servo motor, LabVIEW software programming controls the NI9263 output analog voltage signal to the servo drive to realize of motor torque control. The algorithm adopts the fractional order control method to realize the motion control of the two-degree-of-freedom manipulator with high speed and high precision, the engineering effectiveness and feasibility of the method are illustrated by experiments.

参考文献/References:

[1] 龙华伟,顾永刚.LabVIEW 8.2.1与DAQ数据采集[M].北京:清华大学出版社,2008.

[2] 吴强,黄建华.分数阶微积分[M].北京:清华大学出版社, 2016.
[3] Barbosa R S, Machado J A T, Ferreira I M. A Fractional Calculus Perspective of PID Tuning[C]// ASME 2003 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2003:651-659.
[4] Serdar E. Hamamci. Stabilization using fractional-order PI and PID controllers[J].Nonlinear Dynamics, 2008,51(1-2): 329-343.
[5] Zhao C, Xue D, Chen Y Q. A fractional order PID tuning algorithm for a class of fractional order plants[C]// IEEE, Mechatronics and Automation,2005 IEEE International Conference, 2005:216-221.
[6] Das S, Pan I, Das S, et al. Improved model reduction and tuning of fractional-order PI(λ)D(μ) controllers for analytical rule extraction with genetic programming[J].Isa Transactions, 2012, 51(2):237.
[7] Chen Y Q, Dou H, Vinagre B M, et al. A ROBUST TUNING METHOD FOR FRACTIONAL ORDER PI CONTROLLERS[J].IFAC Proceedings Volumes,2006, 39(11): 22-27.
[8] Jin C Y, Ryu K H, Su W S, et al. PID auto-tuning using new model reduction method and explicit PID tuning rule for a fractional order plus time delay model[J]. Journal of Process Control, 2014, 24(1):113-128.
[9] Vu T N,Lee M.Analytical design of fractional-order proportional-integral controllers for time-delay processes[J]. Isa Transactions,2013,52(5):583.
[10] 薛定宇.控制数学问题的MATLAB求解[M].北京:清华大学出版社,2007.
[11] Joshi S D, Talange D B. Integer & fractional order PID Controller for fractional order subsystems of AUV[M]. 2013.
[12] Guo W, Song Y, Zhou L, et al. A novel model algorithmic controller with fractional order PID structure[C]//IEEE, Intelligent Control and Automation,2012:2517-2522.
[13] Zhang Y, Li J. Fractional-order PID controller tuning based on genetic algorithm[C]// IEEE, International Conference on Business Management and Electronic Information. 2011:764-767.
[14] Podlubny I, Petras I, Vinagre B M, et al. Analogue Realization of Fractional Order Controllers[J].Fberg Technical University of Kosice Kosice Slovak Isbn Edition, 2002, 29(1-4):281-296.
[15] Podlubny. Numerical solution of ordinary fractional differential equations by the fractional difference method[C]// 1997:507-515.
[16] Axtell M, Bise M E. Fractional calculus application in control systems[C]//Proceedings of the IEEE 1990 National,Aerospace and Electronics Conference,1990. 2002:563-566.

相似文献/References:

[1]白珍龙.分数阶模型参考自适应控制的Matlab设计[J].工业仪表与自动化装置,2016,(01):30.
 BAI Zhenlong.Design of fractional-order model reference adaptive control by matlab[J].Industrial Instrumentation & Automation,2016,(03):30.
[2]张化平,王宇航,陈汉卿.六自由度机械臂运动学分析与仿真[J].工业仪表与自动化装置,2017,(05):127.
 ZHANG Huaping,WANG Yuhang,CHEN Hanqing.Kinematics analysis and simulation of six degrees of freedom manipulator[J].Industrial Instrumentation & Automation,2017,(03):127.
[3]田 悦,袁德成.基于多策略改进狼群算法的机械臂路径规划[J].工业仪表与自动化装置,2023,(05):76.[doi:10.19950/j.cnki.cn61-1121/th.2023.05.016]
 TIAN Yue,YUAN Decheng.Robot path planning based on multi strategy improved wolf pack algorithm[J].Industrial Instrumentation & Automation,2023,(03):76.[doi:10.19950/j.cnki.cn61-1121/th.2023.05.016]

备注/Memo

备注/Memo:
收稿日期:2017-12-15
基金项目:广东省自然科学基金项目(2015A030310307);广东省高等学校优秀青年教师培养计划(YQ2015087);广东省与湛江市科技厅项目(2014A020208118;2016A02018)
作者简介:胡斌(1993),男,硕士研究生,研究方向为数字化设计与制造技术。
更新日期/Last Update: 2018-06-15