|本期目录/Table of Contents|

[1]徐梁刚,虢 韬,史洪云,等.输电线路走廊地质灾害自动勘测和建模系统研究[J].工业仪表与自动化装置,2019,(02):44-48.[doi:1000-0682(2019)02-0000-00]
　XU Lianggang,GUO Tao,SHI Hongyun,et al.Research on automatic survey and modeling system for geological hazards in transmission line corridors[J].Industrial Instrumentation & Automation,2019,(02):44-48.[doi:1000-0682(2019)02-0000-00]
点击复制

输电线路走廊地质灾害自动勘测和建模系统研究

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:
期数:
2019年02期
页码:
44-48
栏目:
出版日期:
2019-04-15

文章信息/Info

Title:
Research on automatic survey and modeling system for geological hazards in transmission line corridors
作者:
徐梁刚1; 虢 韬1; 史洪云1; 时 磊1; 陈凤翔1; 简思亮2; 高嘉辰2
1.贵州电网有限责任公司输电运行检修公司，贵阳 550002；2.武汉大学 电气工程学院，武汉 430072
Author(s):
XU Lianggang1;  GUO Tao1;  SHI Hongyun1;  SHI Lei1;  CHEN Fengxiang1;  JIAN Siliang2;  GAO Jiachen2
1. Guizhou Power Grid Co., Ltd. Transmission Operation Maintenance Company, Guiyang 550002, China;?
2. Electrical Engineering College, Wuhan University, Wuhan 430073, China)
关键词:
无人机; 输电线路; 地质灾害; 图像配准; 空间量测
Keywords:
UAV;  transmission line;  geological hazard;  image registration;  space measurement
分类号:
TM75;P694
DOI:
1000-0682(2019)02-0000-00
文献标志码:
A
摘要:
基于无人机航拍技术、地理信息技术、图像处理技术和数值模拟计算技术，研究输电线路走廊地质灾害的自动勘测和建模系统，可得到稳定、高质、全面、准确的现场受灾信息。无人机测试结果表明，系统后台能根据拍摄影像在短时间内生成输电线路走廊全拼图和三维场景模型，模型精度满足要求。在贵州电网的应用表明，该系统能提高整体的地灾勘测质量及效率，保障对地质灾情的准确评估，为电网运维提供辅助决策，具有大规模应用的潜质。
Abstract:
Based on UAV aerial photography technology, geographic information technology, image processing technology and numerical simulation technology, this paper studies the automatic survey and modeling system for geological disasters in transmission line corridors, which can obtain stable, high quality, comprehensive and accurate on-site disaster information. The drone test results show that the background system can generate the full line jigsaw puzzle and three-dimensional scene model of the transmission line corridor in a short time according to the captured image, and the modeling accuracy meets the requirements. The application in Guizhou Power Grid shows that the system can improve the overall quality and efficiency of ground disaster survey, ensure the accurate assessment of geological disasters, and provide auxiliary decision-making for power grid operation and maintenance, with the potential for large-scale application.

参考文献/References:

[1] 张星海,贾志杰.四川电网建设运维面临的挑战和解决措施[J].高电压技术, 2016,42(4):1091-1099.

[2] 王玉杰.云南电网物理脆弱性分析与地质灾害研究[D].武汉:武汉理工大学, 2013.
[3] 严福章,袁兆祥,盛大凯.500 kV二滩—自贡输电线路地质灾害及防治之启示[J].电力建设,2010, 31(5):26-29.
[4] 陈英,马东涛,杨敏.超高压输电线路塔基滑坡灾害特征分析与治理[J].电力建设,2014, 35(10):69-73.
[5] 佘小年.崩塌、滑坡地质灾害监测现状综述[J].铁道工程学报, 2007, 24(5):51-52.
[6] 董文文,朱鸿鹄,孙义杰,等.边坡变形监测技术现状及新进展[J].工程地质学报,2016, 24(6):1088-1095.
[7] 黄健,巨能攀,何朝阳,等.基于新一代信息技术的地质灾害监测预警系统建设[J].工程地质学报,2015, 23(1):140-147.
[8] 赵君.基于航拍图像的杆塔类型判断及状态识别[D].保定:华北电力大学,2010.
[9] 柴先涛,梁久祯,稂龙亚.基于曲率的全仿射曲线图像配准[J].计算机科学,2016,43(1):53-56.
[10] 李长春,齐修东,雷添杰,等.基于改进SURF算法的无人机遥感影像快速拼接[J].地理与地理信息科学,2013, 29(5):22-25.

相似文献/References:

[1]梁 琛,贾远温,王晓兰.基于LabVIEW的输电线路工频参数测量系统设计[J].工业仪表与自动化装置,2015,(02):26.
　LIANG Chen,JIA Yuanwen,WANG Xiaolan.The design on measure system for transmission lines power frequency parameters based on LabVIEW[J].Industrial Instrumentation & Automation,2015,(02):26.
[2]王 鑫,张西虎.一种新型无人机配电控制器设计[J].工业仪表与自动化装置,2017,(01):68.
　WANG Xin,ZHANG Xihu.A new design of power distribution controller for UAV[J].Industrial Instrumentation & Automation,2017,(02):68.
[3]陈登峰a,王彦柱b,姜 翔b,等.基于差分GPS的无人机群小范围定位方法研究[J].工业仪表与自动化装置,2019,(05):118.[doi:1000-0682(2019)05-0000-00]
　CHEN Dengfenga,WANG Yanzhub,JIANG Xiangb,et al.Research on positioning method of small range of UAV based on differential GPS[J].Industrial Instrumentation & Automation,2019,(02):118.[doi:1000-0682(2019)05-0000-00]
[4]杨 健,王 水,汪 强,等.无人机油箱油量测量的方法研究[J].工业仪表与自动化装置,2020,(05):115.[doi:1000-0682(2020)05-0000-00]
　YANG Jian,WANG Shui,WANG Qiang,et al.A new method for measuring the fuel volume of UAV tank[J].Industrial Instrumentation & Automation,2020,(02):115.[doi:1000-0682(2020)05-0000-00]
[5]袁钟达,黄 迟,杨 健.一种无人机自动拍照后处理的装置及方法[J].工业仪表与自动化装置,2021,(03):119.[doi:10.19950/j.cnki.cn61-1121/th.2021.03.025]
　YUAN Zhongda,HUANG Chi,YANG Jian.A device and method for automatic photo post processing of UAV[J].Industrial Instrumentation & Automation,2021,(02):119.[doi:10.19950/j.cnki.cn61-1121/th.2021.03.025]
[6]赵航航,翁珠奋,刘 欢,等.输电线路地线补修机器人设计研发[J].工业仪表与自动化装置,2022,(06):18.[doi:10.19950/j.cnki.cn61-1121/th.2022.06.004]
　ZHAO Hanghang,WENG Zhufen,LIU Huan,et al.Design and development of ground wire repair robot for transmission line[J].Industrial Instrumentation & Automation,2022,(02):18.[doi:10.19950/j.cnki.cn61-1121/th.2022.06.004]

备注/Memo

备注/Memo:
收稿日期：2018-08-09
作者简介：徐梁刚(1980)，男，贵州清镇人，助理工程师，高级技师，从事输电线路运行维护管理。
更新日期/Last Update: 2019-04-15