|本期目录/Table of Contents|

[1]姜 帅,胡 俊,栾 瑛,等.基于PLC的叠片式超级电容分拣系统设计[J].工业仪表与自动化装置,2020,(06):39-42.[doi:1000-0682(2020)06-0000-00]
　JIANG Shuai,HU Jun,LUAN Ying,et al.Design of laminated supercapacitor detection and sorting system based on PLC[J].Industrial Instrumentation & Automation,2020,(06):39-42.[doi:1000-0682(2020)06-0000-00]
点击复制

基于PLC的叠片式超级电容分拣系统设计

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:
期数:
2020年06期
页码:
39-42
栏目:
出版日期:
2020-12-15

文章信息/Info

Title:
Design of laminated supercapacitor detection and sorting system based on PLC
作者:
姜 帅; 胡 俊; 栾 瑛; 等
1.沈阳工业大学 机械工程学院，辽宁 沈阳 110870；
2.上海蓝时自动化设备有限公司，上海 201800
Author(s):
JIANG Shuai1;  HU Jun1; LUAN Ying2; WANG Xu1
1.School of Mechanical Engineering,Shenyang University of Technology,Liaoning Shenyang 110870, China;
2.Shanghai LanShi Automation Equipment Ltd.com ,Shanghai 201800,China
关键词:
叠片式电容; 自动检测; 自动分拣
Keywords:
laminateds upercapacitors; automatic detection; automatic sorting
分类号:
TH11
DOI:
1000-0682(2020)06-0000-00
文献标志码:
A
摘要:
针对叠片式超级电容检测分拣中效率低和准确度差的问题，该文通过分析超级电容检测的工艺过程要求，在考虑检测速度、准确率和测试条件一致性的基础上，首先对分拣系统的总体方案和工作流程进行分析，并对设备运行过程设计了适合自动化处理的测试工艺；然后以欧姆龙CP1H-X40型PLC为控制器的超级电容检测设备；最后对超级电容检测设备进行了实际运行试验。结果表明：相比于传统手工分拣，自动化设备的连续检测效率有着极大地提升，且试验条件的一致性强，设备检测结果与现行的手动检测结果比较，准确率可达97.5%，完全可以替代手工检测。该设备通过更换检测工装板，也可扩展应用于不同规格或类型的产品检测中，具有较强的扩展性和工艺灵活性。
Abstract:
Aiming at the problem of low efficiency and poor accuracy in automatic detection and sorting of laminated supercapacitor, the technological requirements of supercapacitor detection are analyzed in this paper, and on the basis of considering the detection speed and accuracy, the overall scheme and workflow of sorting system are analyzed firstly, and the equipment operation process is designed to automatically process the test process; Then the hardware selection and software programming of the control system are described, and the supercapacitor detection equipment based on Omron CP1H-XA40 PLC is designed; Finally, the supercapacitor detection equipment is tested. The results show that compared with the traditional manual sorting, the detection efficiency of automatic equipment has been greatly improved, and the accuracy of equipment detection results is as high as 97.5%. The equipment can also be extended to different specifications or types of product testing by replacing the testing tooling board, with strong expansibility.

参考文献/References:

[1] 王鹏,王晗,张建文,等.超级电容储能系统在风电系统低电压穿越中的设计及应用[J].中国电机工程学报,2014(10):1528-1536.

[2] 单金生,吴立峰,关永,等.超级电容建模现状及展望[J].电子元件与材料,2013,32(08):5-10.
[3] 陈子珍,梅晓妍,刘国光.PLC控制全自动电容检测装置的设计与实现[J].宁波职业技术学院学报,2012,16(05): 1-3+7.
[4] 冯佳.极微小电容的检测技术研究[D].长春:中国科学院(长春光学精密机械与物理研究所).2014.
[5] 胡得时.微机化电容自动检测分选系统[J].电测与仪表,1989(03):28-30+27.
[6] 侯亚宾,卜雄洙,孙斌.微小电容检测系统的设计及应用[J].国外电子测量技术,2015,34(12):87-90.
[7] 邢本凤.高精度微弱电容检测技术研究[D].哈尔滨：哈尔滨工业大学,2010.
[8] 崔丽波.基于DSP的煤矿电容电流自动检测与调谐的研究[D].阜新:辽宁工程技术大学,2011.

相似文献/References:

[1]徐贺婷,王 铁,李维彪,等.基于51单片机的光式孔洞检测仪设计[J].工业仪表与自动化装置,2017,(02):88.
　XU Heting,WANG Tie,LI Weibiao,et al.Design of the light hole detector based on 51 microcontroller[J].Industrial Instrumentation & Automation,2017,(06):88.
[2]周秉直,王慧元,李 锋,等.热量表耐久性自动检测及质量分析平台研究[J].工业仪表与自动化装置,2017,(03):37.
　ZHOU Bingzhi,WANG Huiyuan,LI Feng,et al.Research on automatic test and quality analysis platform of heat meter durability[J].Industrial Instrumentation & Automation,2017,(06):37.
[3]曹凤梅,张红光.光切法表面粗糙度测量仪器自动化改进设计[J].工业仪表与自动化装置,2020,(06):48.[doi:1000-0682(2020)06-0000-00]
　CAO Fengmei,ZHANG Hongguang.Automation improvement design of light-cut surface roughness measuring instrument[J].Industrial Instrumentation & Automation,2020,(06):48.[doi:1000-0682(2020)06-0000-00]
[4]郁文君,张 杰,李文学.基于SJA1000的CAN总线控制器自动检测系统[J].工业仪表与自动化装置,2023,(04):43.[doi:10.19950/j.cnki.cn61-1121/th.2023.04.008]
　YU Wenjun,ZHANG Jie,LI Wenxue.Automatic detection system of CAN bus controller based on SJA1000[J].Industrial Instrumentation & Automation,2023,(06):43.[doi:10.19950/j.cnki.cn61-1121/th.2023.04.008]

备注/Memo

备注/Memo:
收稿日期：2020-05-08
作者简介：姜帅（1993），男，硕士研究生，主要从事机电一体化产品研究等。
更新日期/Last Update: 1900-01-01