|本期目录/Table of Contents|

[1]安 健,于 飞.三端口MMC变换器研究[J].工业仪表与自动化装置,2021,(04):53-57+63.[doi:10.19950/j.cnki.cn61-1121/th.2021.04.011]
　AN Jian,YU Fei.Research on three-port power converter based on MMC[J].Industrial Instrumentation & Automation,2021,(04):53-57+63.[doi:10.19950/j.cnki.cn61-1121/th.2021.04.011]
点击复制

三端口MMC变换器研究

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:
期数:
2021年04期
页码:
53-57+63
栏目:
出版日期:
2021-08-15

文章信息/Info

Title:
Research on three-port power converter based on MMC
作者:
安 健; 于 飞
青岛科技大学 自动化与电子工程学院, 山东 青岛 266061
Author(s):
AN Jian; YU Fei
College of Automation and Electronic Engineering，Qingdao University of Science and Technology,Shandong Qingdao 266061，China
关键词:
三端口电力电子变换器; 载波移相; 模块化多电平; 双闭环控制; 额外子模块
Keywords:
three-port power converter; the carrier phase shift control; modularized multilevel; double closed-loop control; extra Sub Module
分类号:
TM46
DOI:
10.19950/j.cnki.cn61-1121/th.2021.04.011
文献标志码:
A
摘要:
随着能源互联网概念的提出，电力电子变换器作为其概念的核心设备，应用愈加广泛，但其发展受到耐压不高、容量较小、成本较高等因素的制约。模块化多电平技术可以很好地解决上述问题，故在传统MMC技术的基础上，该文构思了一种基于MMC的多端口变换器的拓扑结构，通过额外添加一个SM子模块,在此基础上对其原理与性能特点进一步描述。通过对传统MMC子模块与额外添加的子模块分别控制，实现输出直流电压与高频交流电压的目的。首先对于多端口MMC拓扑结构进行了参数的计算与设计，随后通过Matlab软件搭建了多端口的模型，最后通过控制策略进行了仿真模拟实验，阐述了其可行性。
Abstract:
As energy concept of the Internet is the core equipment of power electronic converter as its concept, application more widely, but its development is constrained by the low voltage level , high cost and small capacity , modular multilevel technology can well solve this problem, on the basis of the traditional technology of MMC, conceived a topology of multi-port converter based on MMC, by adding an additional SM module. On the basis of the principle and performance characteristics is described further. By controlling the traditional MMC sub-module and the additional sub-module respectively, the aim of output DC voltage and HIGH-FREQUENCY AC voltage is realized. Firstly, the parameters of the multi-port MMC topology are calculated and designed, then the multi-port model is built by Matlab software, and then the simulation experiment is carried out by different control strategies to illustrate its feasibility.

参考文献/References:

[1]赵争鸣,冯高辉,袁立强,等.电能路由器的发展及其关键技术[J].中国电机工程学报,2017,37(13):3823-3834.

[2]KADO Y , SHICHIJO D , WADA K , et al. Multiport power router and its impact on future smart grids[J]. Radio ence, 2016, 51(7):1234-1246.
[3] TARISCIOTTI L , ZANCHETTA P , PIPOLO S , et al. Three-port energy router for universal and flexible power management in future smart distribution grids[J]. 2017:1276-1281.
[4]袁斌华,李高清,薛彪.基于MMC的多端直流输电系统控制策略研究[J].工业仪表与自动化装置,2016(04):3-8.
[5]KOURO S, MALINOWSKI M, GOPAKUMAR K, et al. Recent advance and industrial applications of multilevel converters[J]. IEEE Transactions on Industrial Electronics. 2010, 57(8):2553-2580.
[6]魏建博.基于MMC的三端口电力电子变压器研究[D].秦皇岛：燕山大学,2019.
[7]MA D , CHEN W , SHU L , et al. A Multiport Power Electronic Transformer Based on Modular Multilevel Converter and Mixed-Frequency Modulation[J]. IEEE Transactions on Circuits and Systems II: Express Briefs, 2020, 67(7):1284-1288.
[8]张宏杰.基于载波移相调制的MMC控制策略研究及仿真[J].盐城工学院学报,2019,32(04):18-24.
[9] MEI J, SHEN K, XIAO B, et al. A new selective loop bias mapping phase disposition PWM with dynamic voltage balance capability for modular multilevel converter[J]. IEEE Transactions on Industrial Electronics, 2014, 61(2):798-807.
[10]袁小峰. MMC整流器关键技术研究[D].南京：南京航空航天大学，2017.
[11]贾永博,杨春,张媛.基于DSP28335的单相逆变器缓冲电路优化设计[J].工业仪表与自动化装置,2018(03):44-47.
[12]刘海珍,贺皎,王能才.基于功率平衡的直流母线电压控制策略研究[J].工业仪表与自动化装置,2018(03):124-128.
[13]肖强,朱晟毅,蒲羿,等.一种模块化多电平换流器电压均衡改进策略[J/OL].电源学报:1-13[2021-02-04].http://kns.cnki.net/kcms/detail/12.1420.TM.20191122.1644.004.html.
[14]曹立杨.模块化多电平换流器控制策略研究[D].沈阳：沈阳工业大学,2019.
[15]周月宾,江道灼,郭捷,等.模块化多电平换流器子模块电容电压波动与内部环流分析[J].中国电机工程学报,2012,32(24):8-14+4.

相似文献/References:

[1]张硕博,刘喜梅,王 宁.基于载波移相控制的单相MMC整流控制[J].工业仪表与自动化装置,2021,(03):39.[doi:10.19950/j.cnki.cn61-1121/th.2021.03.008]
　ZHANG Shuobo,LIU Ximei,WANG Ning.Single-phase MMC rectifier control based on carrier phase shift control[J].Industrial Instrumentation & Automation,2021,(04):39.[doi:10.19950/j.cnki.cn61-1121/th.2021.03.008]

备注/Memo

备注/Memo:
收稿日期：2020-10-30

作者简介：
安健（1996），硕士研究生，主要从事电力电子技术及应用、柔性直流输电系统硬件在环仿真等研究。
更新日期/Last Update: 1900-01-01