|本期目录/Table of Contents|

[1]陈 露,李 凌.直流电机转速系统控制方法仿真研究[J].工业仪表与自动化装置,2021,(05):29-34.[doi:10.19950/j.cnki.cn61-1121/th.2021.05.007]
　CHEN Lu,LI Ling.Simulation research on control method of DC motor speed system[J].Industrial Instrumentation & Automation,2021,(05):29-34.[doi:10.19950/j.cnki.cn61-1121/th.2021.05.007]
点击复制

直流电机转速系统控制方法仿真研究

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:
期数:
2021年05期
页码:
29-34
栏目:
出版日期:
2021-10-15

文章信息/Info

Title:
Simulation research on control method of DC motor speed system
作者:
陈 露; 李 凌
沈阳化工大学 信息工程学院，辽宁 沈阳 110142
Author(s):
CHEN Lu ; LI Ling
（Shenyang University of Chemical Technology,Liaoning Shengyang110142,China）
关键词:
直流电机; PID控制; 滞后补偿控制; 模糊PID控制; SIMULINK
Keywords:
DC motor;  PID control;  lag compensation control;  fuzzy PID control; SIMULINK
分类号:
TP273
DOI:
10.19950/j.cnki.cn61-1121/th.2021.05.007
文献标志码:
A
摘要:
直流电机是一种多变量、非线性的复杂系统，为提高直流电机转速系统的动、静态性能，采用了传统PID控制、滞后补偿控制和模糊PID控制三种控制方法。在MATLAB仿真环境中建立直流电机转速系统模型，分别加入PID控制器、滞后控制器和模糊PID控制器，设置参数后，响应曲线达到期望值且得到最优响应。为测试系统的抗干扰能力，分别在PID控制、滞后补偿控制和模糊PID控制系统仿真2 s时加入阶跃扰动，三种控制方法具有抗干扰性，能恢复到期望稳定状态。仿真结果显示，加入三种控制器后，系统的调整时间、超调量减小，稳态误差降低，抗干扰能力得到增强。其中，模糊PID控制比传统PID控制、滞后补偿控制具有更小的调整时间和超调量。由此可见，模糊PID控制对直流电机转速能够达到良好的控制效果，具有一定的参考价值。
Abstract:
DC motor is a multi variable, nonlinear and complex system. In order to improve the dynamic and static performance of DC motor speed system, three control methods are adopted: traditional PID control, lag compensation control and Fuzzy PID control. Firstly, the speed system model of DC motor is established in MATLAB simulation environment. PID controller, lag controller and Fuzzy PID controller are added respectively. After setting parameters, the response curve reaches the expected value and the optimal response is obtained. Secondly, step disturbance is added to PID control, lag compensation control and Fuzzy PID control system simulation for 2 s. The three control methods are anti-interference and can recover to the expected stable state in a period of time. The simulation results show that the adjustment time and overshoot of the system are reduced, the steady-state error is reduced and the anti-interference ability is enhanced. Among them, Fuzzy PID control has less adjustment time and overshoot than traditional PID control and lag compensation control. Therefore, the Fuzzy PID control can achieve good control effect on DC motor speed, which has certain reference value.

参考文献/References:

[1] 赵娟萍,王会珍,周喜,等.直流电机转速控制系统设计[J].电子测试,2020(17):21-22+34.

[2] LOTFY A , KAVEH M , MOSAVI M R , et al. An enhanced fuzzy controller based on improved genetic algorithm for speed control of DC motors[J]. Analog Integrated Circuits and Signal Processing, 2020:1-15.
[3] MILOVANOVI M B , ANTI? D S, MILOVANOVCI M T， et al.?Adaptive PID control based on orthogonal endocrine neural networks[J].Neural Networks, 2016:84.
[4] 许惠君.基于PID算法的直流电机转速控制系统的设计[J].科技资讯,2013(13):108-109.
[5] 张志伟,李永强,何大龙.基于模糊自适应PI算法的直流电机控制系统[J].光电技术应用,2018,33(04):40-44.
[6] 王山卉.利用单片机控制直流电机调速系统设计[J].甘肃科技纵横,2018,47(03):11-16.
[7] ELSROGY W M , BAHGAAT N K , SAYED M E, et al. Speed control of DC motor using PID controller based on changed intelligence techniques[J].Electronics,2018,07(01):1-4.
[8] 解后循,宋卫东.模糊自适应PID无刷直流电机转速控制系统建模与仿真[J].机电技术,2014(06):69-72.
[9] 周万顺.基于模糊控制的无刷直流电机速度控制系统设计[D].洛阳:河南科技大学,2014:33-35.
[10] 施云.基于模糊PID控制的直流电机控制算法仿真分析[J].电子制作,2020(13):6-9.[11] 杨昕红,刘长文.基于MATLAB的直流无刷电机模糊PID控制设计[J].仪表技术与传感器,2019(11):105-108.
[12] 赵靖,曾灵飞.现代电机控制技术的发展现状及展望[J].时代汽车,2020(07):22-23.
[13] 刘慧博,王静,吴彦合.无刷直流电机模糊自适应PID控制研究与仿真[J].控制工程,2014,21(04):583-587.
[14] 苏兴华.基于模糊控制理论的PID控制器设计[J].中国管理信息化,2019,22(03):136-139.
[15] 胡凡,李凡.一种求解MADM问题的模糊算法[J].华中理工大学学报,1999(08):57-59.
[16] DASTJERDI Ali Ahmadi, SAIKUMAR Niranjan, HOSSEINNIA Hassan. Tuning guidelines for fractional order PID controllers: rules of thumb[J].Mechatronics, 2018:56.
[17] 杜荣华,朱昭,舒雄,等.无刷直流电机自适应模糊PID控制及仿真[J]. 长沙理工大学学报（自然科学版）,2014(2):60-66.

相似文献/References:

[1]邹益民.基于SIMULINK-S函数的联合站脱水单神经元PID仿真[J].工业仪表与自动化装置,2014,(05):29.
　ZOU Yimin.Simulation of single neuron PID control for the union station crude oil dehydration process based on SIMULINK-S functions[J].Industrial Instrumentation & Automation,2014,(05):29.
[2]张亚明,高晓丁,刘亚亮,等.基于LabVIEW技术的城市深井供水网水位控制系统设计[J].工业仪表与自动化装置,2015,(03):86.
　ZHANG Yaming,GAO Xiaoding,LIU Yaliang,et al.The design of urban water supply network in deep water level control system based on LabVIEW Technology[J].Industrial Instrumentation & Automation,2015,(05):86.
[3]陈宏希,邹益民.基于OPC的MATLAB与S7-200 PLC实时通信在过程控制实验装置中应用[J].工业仪表与自动化装置,2015,(05):55.
　CHEN Hongxi,ZOU Yimin.Research on application of real-time communication of MATLAB with S7-200 PLC in process control experimental device based on OPC[J].Industrial Instrumentation & Automation,2015,(05):55.
[4]尹志豪,何洪伟,宋 维,等.SBR法反应池溶解氧（DO）的预测控制仿真研究[J].工业仪表与自动化装置,2015,(06):93.
　YIN Zhihao,HE Hongwei,SONG Wei,et al.Study on predictive control simulation of dissolved oxygen（DO）in SBR reaction pool computer engineering and applications[J].Industrial Instrumentation & Automation,2015,(05):93.
[5]牛宏侠a,侯 涛b.基于超声波传感器的液位控制实验研究[J].工业仪表与自动化装置,2016,(04):71.
　NIU Hongxiaa,HOU Taob.Experiment study of liquid level control based on ultrasonic sensor[J].Industrial Instrumentation & Automation,2016,(05):71.
[6]邵 威,刘犇成.Mamdani模糊算法在S7-300上的应用及仿真[J].工业仪表与自动化装置,2016,(05):36.
　SHAO Wei,DAI Shigang,LIU Bencheng.Application and simulation of Mamdani fuzzy algorithm on S7-300[J].Industrial Instrumentation & Automation,2016,(05):36.
[7]党存禄,杜小波.粒子群优化变论域模糊PID控制在风电机组变桨距中的应用[J].工业仪表与自动化装置,2017,(05):97.
　DANG Cunlu,DU Xiaobo.Application of variable universe fuzzy PID control optimized by particle swarm in variable pitch of wind turbine[J].Industrial Instrumentation & Automation,2017,(05):97.
[8]路 颜,程光威,张 媛.不平衡和非线性负载下的逆变器控制技术研究[J].工业仪表与自动化装置,2018,(05):37.[doi:1000-0682（2018）05-0000-00]
　LU Yan,GHENG Guangwei,ZHANG Yuan.Research on control technology of inverter with unbalanced and nonlinear loads[J].Industrial Instrumentation & Automation,2018,(05):37.[doi:1000-0682（2018）05-0000-00]
[9]赵国新,吕文洋,刘昌龙,等.液压伺服系统建模与模糊自适应PID控制研究[J].工业仪表与自动化装置,2019,(02):3.[doi:1000-0682(2019)02-0000-00]
　ZHAO Guoxin,LV Wenyang,LIU Changlong,et al.Modeling and research on fuzzy adaptive PID control for hydraulic servo system[J].Industrial Instrumentation & Automation,2019,(05):3.[doi:1000-0682(2019)02-0000-00]
[10]闵 军,蒋文萍.自整定模糊PID算法在精密温控系统中的运用[J].工业仪表与自动化装置,2019,(04):35.[doi:1000-0682(2019)04-0000-00]
　MIN Jun,JIANG Wenping.Application of self-tuning fuzzy PID algorithm in precision temperature control system[J].Industrial Instrumentation & Automation,2019,(05):35.[doi:1000-0682(2019)04-0000-00]

备注/Memo

备注/Memo:
收稿日期：2020-12-01
作者简介：
陈露（1998），女，汉，江苏徐州，研究生在读，主要研究方向为智能控制方法研究。通信作者：李凌（1972），女，汉，山东梁山，副教授，博士，主要研究方向为复杂系统建模与控制方法研究。
更新日期/Last Update: 1900-01-01