|本期目录/Table of Contents|

[1]刘丽丽,左继红.放大器非线性失真测量装置的设计与实现[J].工业仪表与自动化装置,2022,(03):18-21.[doi:10.19950/j.cnki.cn61-1121/th.2022.03.004]
 LIU Lili,ZUO Jihong.Design and implementation of nonlinear distortion measuring device for amplifier[J].Industrial Instrumentation & Automation,2022,(03):18-21.[doi:10.19950/j.cnki.cn61-1121/th.2022.03.004]
点击复制

放大器非线性失真测量装置的设计与实现

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:
期数:
2022年03期
页码:
18-21
栏目:
出版日期:
2022-06-15

文章信息/Info

Title:
Design and implementation of nonlinear distortion measuring device for amplifier
文章编号:
1000-0682(2022)03-0000-00
作者:
刘丽丽左继红
(湖南铁道职业技术学院,湖南 株洲 412003)
Author(s):
LIU Lili ZUO Jihong
(Hunan Railway Professional Technology College, Hunan Zhuzhou 412001, China )
关键词:
STM32控制系统傅里叶变换总谐波失真测量THD值
Keywords:
STM32 kontrol system Fourier transform total harmonic distortion THD value
分类号:
TM935
DOI:
10.19950/j.cnki.cn61-1121/th.2022.03.004
文献标志码:
A
摘要:
设计了一种放大器非线性失真测量装置,以晶体管放大电路作为基本电路,采用STM32F103RET6作为控制器,控制器输出电平给电压转换电路控制模拟开关,通过液晶触摸屏按钮使放大器输出无明显失真波形和4种非线性失真波形。控制器采集被测信号进行傅里叶变换得到基波和各谐波对应的幅值,计算信号总谐波失真THD值并显示。该系统可以准确测量频率为0.1 Hz~10.0 kHz、峰峰值Vpp为20 mV~5 V的信号。实测结果表明系统稳定可靠,精度高,具有较好的实用价值和应用前景。
Abstract:
A measuring device of nonlinear distortion for amplifier is designed.The transistor amplifier circuit is used as the basic circuit, and STM32F103RET6 is used as the controller. The output level of the controller is given to the voltage conversion circuit to control the analog switch, the LCD touch screen button is used to realize the output of non-obvious distortion wave and four kinds of non-linear distortion wave. The controller collects the measured signal and carries out Fourier transform to get the amplitude of fundamental wave and each harmonic wave , calculates the THD value of the signal and displays it.The system can measure the signal with the frequency of 0.1 Hz ~10.0 kHz and the peak Vpp value of 20 mV~5 V accurately. The experimental results show that the system is stable and reliable with high precision, and has good practical value and application prospect.

参考文献/References:

[1] 赵二刚,王艳芳,张维.低频信号失真度测量系统设计[J].自动化与仪表,2019,34(12):53-56+60.

[2] 胡朝炜.数据采集设备的失真度测试方法研究[J].电子测量技术,2009,31(01):137-139+150.
[3] 江涛,侯伟.嵌入式音频信号分析仪的设计与实现[J].电子测量技术,2019,42(13):137-141.
[4] 唐宇,魏建国,范方灵,等.基于SPCE061A的失真度测试仪设计[J].攀枝花学院学报,2009,26(06):41-45.
[5] YADAV C S , UPADHYAY A , SINGH V . Estimation of power loss spectra in slightly flattened distorted Bragg fiber waveguide[J]. Optik,2020:210.
[6] 秦德乐,梁蓓,马奎,等.一种微小信号放大器电路的设计[J].智能计算机与应用,2020,10(02):196-199.
[7] 曹保锋,郑毅,李鹏,等.微弱电磁脉冲信号低失真度实时检测的FPGA实现[J].电子学报,2019,47(08):1797-1802.
[8] 李翔,陈实.时频结合的失真度测量方法研究[J].国外电子测量技术,2017,36(01):27-30.
[9] 陈坚,盛庆华,毛礼建,等.基于STM32的音频信号分析仪的设计与实现[J].工业仪表与自动化装置,2016(03):19-21+34.

相似文献/References:

备注/Memo

备注/Memo:
收稿日期:2022-01-24?div>
基金项目:
湖南省教育厅科学研究项目(19C1211)?/div>

作者简介:
刘丽丽(1985),女,硕士,副教授,主要从事电子方面的教学与科研工作。?/div>

通信作者:
左继红(1981),硕士研究生,研究方向为机械电子技术。
更新日期/Last Update: 1900-01-01