|本期目录/Table of Contents|

[1]房志宏,李 晨,熊继军.高品质因数LC无线无源压力传感器的优化设计[J].工业仪表与自动化装置,2022,(06):62-68.[doi:10.19950/j.cnki.cn61-1121/th.2022.06.012]
 FANG Zhihong,LI Chen,XIONG Jijun.Optimum design of high quality factor LC wireless passive pressure sensor[J].Industrial Instrumentation & Automation,2022,(06):62-68.[doi:10.19950/j.cnki.cn61-1121/th.2022.06.012]
点击复制

高品质因数LC无线无源压力传感器的优化设计

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:
期数:
2022年06期
页码:
62-68
栏目:
出版日期:
2022-12-15

文章信息/Info

Title:
Optimum design of high quality factor LC wireless passive pressure sensor
文章编号:
1000-0682(2022)06-0000-00
作者:
房志宏李 晨熊继军
中北大学省部共建动态测试技术国家重点实验室 山西 太原 030051
Author(s):
FANG ZhihongLI ChenXIONG Jijun
(Key Laboratory of Instrumentation Science and Dynamic Measurement,Ministry of Education, North University of China, Taiyuan 030051 China)
关键词:
压力传感器无线无源仿真分析优化设计高品质因数
Keywords:
pressure sensor wireless passive simulation analysis optimized design high quality factor
分类号:
TP212
DOI:
10.19950/j.cnki.cn61-1121/th.2022.06.012
文献标志码:
A
摘要:
针对恶劣环境下压力信号精确测量和实时监测的迫切需求,该文基于LC谐振电路设计提出了一种高品质强耦合的无线无源压力传感器的优化设计,并针传感器的性能进行仿真优化分析。在matlab仿真分析了获得了用于设计高品质因数传感器电感线圈的对比参数后,对拥有不同参数LC谐振电路的传感器进行耦合仿真优化设计。仿真结果表明,为了使传感器具有较高的品质因数,传感器上的电感线圈不能过多,11圈为最佳,并且在电感线圈的线宽和线距加宽到0.5 mm,厚度增加到70 um时,传感器具有较强的信号传输能力和良好的稳定性。该文所研究的设计方法为实现高精度高稳定性的无线无源压力传感器的设计与研究提供了思路借鉴。
Abstract:
In view of the urgent need for accurate measurement and real-time monitoring of pressure signals in harsh environments, this paper proposes an optimal design of a high-quality strong-coupling wireless passive pressure sensor based on the design of LC resonant circuit, and conducts simulation optimization analysis based on the performance of the sensor. After the matlab simulation analysis obtained the comparative parameters used to design the high quality factor sensor inductance coil, the coupling simulation optimization design of the sensor with different parameters of the LC resonant circuit was carried out. The simulation results show that in order to make the sensor have a high quality factor, the inductance coil on the sensor should not be too many, 11 turns is the best, and when the line width and line spacing of the inductance coil are widened to 0.5mm and the thickness is increased to 70um , the sensor has strong signal transmission ability and good stability. The design method studied in this paper provides a reference for the design and research of wireless passive pressure sensor with high precision and high stability.

参考文献/References:

[1]JOHNSON R W, EVANS J L, JACOBSEN P , et al. The changing automotive environment: high-temperature electronics[J]. IEEE Transactions on Electronics Packaging Manufacturing, 2005, 27(3):164-176.

[2]WERNER M R, FAHRNER W R. Review on materials, microsensors, systems and devices for high-temperature and harsh-environment applications[J]. IEEE Transactions on Industrial Electronics, 2001, 48(2):249-257.
[3]XIE F, WANG B, WANG W, et al. Continuous flowing micro-reactor for aqueous reaction at temperature higher than 100°C[J]. Biomicrofluidics, 2013, 7(3):98-103.
[4]宋子军, 张聪, 赵涌,等. 一种用于恶劣环境下的贴片式MEMS压力传感器[J]. 测控技术, 2019, 38(7):5.
[5]吴凌慧, 徐冬. 一种耐高温、耐恶劣环境大压力传感器的设计[J]. 应用科技, 2018, 45(4):5.
[6]乔东坡, 王超. 基于电池供电的无线压力传感器设计[J]. 电子世界, 2016(17):2.
[7]ARSHAK K, JAFER E. Modeling of wireless based sensors data acquisitions systems used for esophagus monitoring[J]. Sensors & Actuators A Physical, 2008, 142(1):390-397.
[8]贾蔓谷, 熊继军, 李晨. 耐高温HTCC无源振动传感器设计与仿真研究[J]. 传感器与微系统,2021,40(9):26-29.
[9]VYSOTINAy E, RIZAKHANOV R, SIGALAEV S, et al. Sensitive elements of high temperature pressure sensors formed from a doped polycrystalline diamond[J]. Materials Science Forum, 2021, 1031:178-183.
[10]罗健. LC无线无源眼压传感器信号采集电路设计[D]. 华中科技大学, 2019.
[11]PHAN A, TRUONG P, SCHADE C, et al. Investigation of long term drift of an intraocular pressure sensor[J]. Microsystem Technologies, 2021,7:1-7.
[12]王艺蒙,舒浩文,韩秀友.高精度硅基集成光学温度传感器研究[J].中国光学,2021,14(6):7.
[13]MOHAN S S , DEL M , BOYD S P , et al. Simple accurate expressions for planar spiral inductances[J]. IEEE J. Solid-State Circuits, 1999, 34(10):1419-1424.
[14]康昊,谭秋林,秦丽,等.基于LTCC的无线无源压力传感器的研究[J].传感技术学报,2013,26(04):498-501.

相似文献/References:

备注/Memo

备注/Memo:
收稿日期:2022-07-20
基金项目:
中国航空发展集团产学研合作项目(No.HFZL2020CXY019);
山西省基础研究计划项目(No.20210302123024);
国家自然科学基金创新研究群体项目(51821003)
作者简介:
房志宏(1996),硕士研究生,主要研究领域为研究方向为无线无源振动传感器研究。
通信作者:
李晨(1987),副教授,博士,主要研究领域为极端环境下的动态测试技术及微纳传感器件。
更新日期/Last Update: 1900-01-01