|本期目录/Table of Contents|

[1]史可忠.Pro/E的变截面悬臂梁局部敏感度分析[J].工业仪表与自动化装置,2014,(05):71-74.
　SHI Kezhong.Study of sensitivity analysis about variable cross-section cantilever beam based on Pro/E[J].Industrial Instrumentation & Automation,2014,(05):71-74.
点击复制

Pro/E的变截面悬臂梁局部敏感度分析(PDF)

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:
期数:
2014年05期
页码:
71-74
栏目:
出版日期:
2014-10-15

文章信息/Info

Title:
Study of sensitivity analysis about variable cross-section cantilever beam based on Pro/E
作者:
史可忠
（兰州石化职业技术学院 机械工程系，兰州 730060）
Author(s):
SHI Kezhong
(Lanzhou Petrochemical College of Technology , Lanzhou 730060,China)
关键词:
Pro/E BMX; 变截面悬臂梁; 参数化设计; 行为建模技术; 敏感度分析
Keywords:
Pro/E behavioral modeling extension;  variable cross-section cantilever beam;  parametric design;  behavior modeling technique;  sensitivity analysis
分类号:
TP391
DOI:
-
文献标志码:
A
摘要:
结合Pro/E的参数化及行为建模技术，提出一种新的变截面悬臂梁结构参数优化方法。结合实例，在Pro/Mechanica工作环境中,通过灵敏度分确定主要参数对模型影响的敏感程度，对变截面悬臂梁的结构参数进行优化, 实现悬臂梁的优化设计，从而根据设计者的特定要求确定出对最大应力变化影响最大最敏感的设计参数,达到周期更短、更精确地设计目标。该方法可以推广应用于其他机械零件的结构设计中。
Abstract:
With the way of Pro/Engineer parametric design and behavioral modeling extension technique, a new optimization method of variable cross-section projecting beam parametric design was proposed .In the Pro /Mechanica model, the sensitive degree of Variable cross-section cantilever beam quality and the main parameters was found by sensitivity analysis , the optimization design of Variable cross-section cantilever beam and Analysis of parts quality changing by was done by Pro/Engineer and Pro/Mechanica. The best structure was gained by optimization for the parameter, Thus it might been obtained the best cantilever beam design parameter according to the specific requirements of maximum stress designers. So as to the design goal on cantilever beam of shorter cycle and more precise can be achieved. The model can be applied to other similar parts of the design process.

参考文献/References:

[1] 刘春蕾.基于网络的齿轮CAD远程设计系统及关键技术研究[D].西安:西北工业大学,2003.
[2] 江渡,陈世刚,马铁强.基于Pro/E的行星齿轮减速器三维参数化CAD系统[J].机械设计,2006(2):60-62.
[3] 宋佳佳,李郁,田卫军.基于Pro/E斜齿轮三维参数化模型的建立[J].现代机械,2007(5):52-53.
[4] 潘秀石,季婷婷.2Pro/E行为建模技术在产品优化设计中的应用[J].2009(4):93-95.
[5] 邢静忠,王永岗,陈晓霞,等.ANSYS分析实例与工程运用[M].北京:机械工业出版社, 2004.
[6] 邓凡平.ANSYS10?0有限元分析自学手册[M]?北京:人民邮电出版社, 2008.
[7] 蒋平,王维.工程力学基础(Ⅱ)[M]?北京:高等教育出版社, 2009.

相似文献/References:

[1]李 润.变截面悬臂梁的Pro/Mechanica有限元法设计[J].工业仪表与自动化装置,2014,(06):64.
　LI Run.Design of variable cross-section cantilever beam based on Pro/Mechanica FEM[J].Industrial Instrumentation & Automation,2014,(05):64.

备注/Memo

备注/Memo:
-
更新日期/Last Update: 1900-01-01