th.2021.03.027]
点击复制

基于蓝牙监控的智能循迹运输小车设计

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

Title:: Design of intelligent tracking transport car based on Bluetooth monitoring

Author(s):: ZHU Linhai; HONG Xiaofang; GAO Fangfang; HAN Lina; LIU Qian; Department of Electricaland Automation,Shandong Labor Vocationaland Technical College,Shandong Jinan 250022,China

Keywords:: transport car; tracking algorithm; Bluetooth monitoring; sensor; single-chip microcompute

摘要:: 以STC15F2K60S2单片机为核心器件，设计了一种基于蓝牙监控的智能循迹运输小车。小车从起点发车，5路光电传感器TCRT5000检测跑道位置信息并传送给单片机。单片机根据循迹算法发送PWM波，通过电机驱动芯片L298N控制电机的转动速度和方向，使小车循迹行进。到达终点，小车停止，物料检测模块监测装货过程，装货完毕，小车返回起点进行卸货。蓝牙模块将小车运行数据传送至手机端，通过手机APP对小车行进状态进行监控。测试结果表明，小车能够快速、稳定的完成循迹、运输、报警功能，实现了小车的预期设计功能。

Abstract:: The system chose STC15F2K60S2 single-chip microcomputer as the core device, an intelligent tracking transport car based on Bluetooth monitoring is designed. The car departs from the starting point. The runway position information is detected by 5 photoelectric sensors TCRT5000 and then transmitted to the single-chip microcomputer. The PWM wave is sent by the single-chip microcomputer according to the tracking algorithm. The motor drive chip L298N is used to control the rotation speed and direction of the motor so as to make the car track. Car stops after reaching the end. After loading, the car returns to the starting point for unloading. The running data of the car is transmitted to the mobile phone by the Bluetooth module, and the running status of the car is monitored by the mobile phone app. The test results show that the car has completed the functions of tracking, transportation, alarm. Finally, we realize the expected design functions of the car.

[1]薛浙瀛.智慧与高效:汽车零配件物流运输方案的精准实施[J].汽车实用技术,2019(20):211-212.

[2]李涵,金刚.定点运输智能小车设计[J].中国高新科技，2019(19):39-40.

[3]贺道坤,蒋方庆,李响.自动线智能物料运输小车设计与实现[J].信息化研究,2019,45(03):74-78.

[4]巫帮锡,李政,廖杰,等.循迹小车的设计与研究[J].科技与创新,2019(18):90-91+93.

[5]王然升.自动循迹智能小车的研究与实现[D].青岛：青岛科技大学,2019.

[6]王延文,王尔申,赵志杰,等.基于智能小车的多功能测量系统设计[J].电子器件,2019,42(01):184-188.

[7]仰竹兰.智能小车控制系统软硬件开发[D].厦门：厦门大学，2018.

[8]李全民,贾林锋.电磁循迹式智能小车传感器布置研究[J].实验技术与管理,2019,36(08):139-142.

[9]朱春华,顾雪亮.基于红外反射式传感器TCRT5000的循迹小车设计[J].现代电子技术,2018,41(18):143-146.

[10]张铮,张江宁,薛竹村,等.循迹避障灭火功能智能小车设计[J].实验室研究与探索,2016,35(11):141-145+205.

[11]高振新,孙建红.基于MSP430的智能循迹运料小车设计[J].实验室研究与探索,2016,35(08):71-74+97.

[12]高玉健,胡立夫,王海明,等.化工厂智能巡检机器人系统设计[J].工业仪表与自动化装置,2020(03):55-59.

[13]吴宇航,谢少伟,俞轲鑫,等.基于MITAppInventor的预付费水表手机充值系统设计[J].机电信息,2018(15):158-159+161.

[14]祝松柏,李清宇.基于STC89C52的循迹避障智能小车的设计[J].轻工科技,2018,34(03):65-66.

[15]于波,王慧.基于STM32单片机的智能消防小车系统[J].工业仪表与自动化装置,2020(04):117-121.

备注/Memo:: 收稿日期：2020-10-10

基金项目：
2019年山东省高等学校“青创科技计划”（2019KJN015）

作者简介：
朱林海（1990），男，山东泰安人，硕士研究生，助教，研究方向为生产过程自动化。

更新日期/Last Update: 1900-01-01