th.2022.05.002]
点击复制

基于FPGA与STM32的多通道温度采集系统设计

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

Title:: Design of multi-channel temperature acquisition system based on FPGA and STM32

Author(s):: ZHOU Guangxing; SU Shujing; LIANG Wenke; LIANG Dongfei; （Key Laboratory of Instrumentation Science and Dynamic Measurement，Ministry of Education, North University of China, Taiyuan 030051，China）

Keywords:: type E thermocouple; MAX31856; cold end compensation; multichannel temperature measurement; FPGA; STM32

摘要:: 针对热加工领域对测温准确性，及时性提出的更高要求以及产品多点分布测温等问题，该文设计了一种多通道温度采集系统。该系统利用E型热电偶，抗混叠滤波器，MAX31856采集电路，以及由FPGA与STM32组成的测温系统对加工过程进行温度测量；前端调理电路将E型热电偶采集的电压信号进行放大滤波处理,然后通过MAX31856采集电路进行冷端补偿后将其转换为数字量，最后由FPGA通过接收STM32的指令对数据进行采集存储以及实时显示。实验结果表明该多路测温系统在0~400℃的测温范围内、测量精度低于±0.2%，测量温度分辨率达到0.06℃，并且响应速度快、反应灵敏，在热加工领域具有一定的应用价值。

Abstract:: Aiming at the higher requirement of temperature measurement accuracy and timeliness in the field of hot processing and the problems of multi-point distribution temperature measurement of products, a multi-channel temperature acquisition system is designed in this paper. The system uses e-type thermocouple, anti-aliasing filter, MAX31856 acquisition circuit, and temperature measurement system composed of FPGA and STM32 to measure the temperature in the machining process. The front-end conditioning circuit amplifies and filters the voltage signal collected by e-type thermocouple, and then converts it to digital quantity after cold end compensation by MAX31856 acquisition circuit. Finally, FPGA collects and stores the data and displays it in real time by receiving STM32 instructions. The experimental results show that the multi-channel temperature measuring system is within the temperature measuring range of 0~400℃, the measurement accuracy is less than ±0.2%, the temperature resolution is 0.06℃, and the response speed is fast and sensitive, which has certain application value in the field of hot processing.

[1] 常广晖,常书平,张亚超.高精度热电偶测温电路设计与分析[J].计算机测量与控制,2021,29(03):67-71.

[2] 刘培,刘宾.STM32+FPGA的导常振动信号采集存储系统[J].单片机与嵌入式系统应用,2022,v.22;

[3] 侯志伟,包理群,杜青青.基于STM32的多通道温度测量系统研究与设计[J].工业仪表与自动化装置,2021 (05):50-55.

[4] 王乐群,文丰,张凯华.基于FPGA的高精度S型热电偶温度测量系统设计[J].电子技术应用,2022,48(02):41-45.

[5] 罗维平,周博,陈军,等.基于Pt100的低温真空冷冻干燥机温度测量系统[J].现代电子技术,2021,44(18):27-32.

[6] 李洋,刘振革,王仁辉,等.分布式热电偶温度采集系统设计[J].内燃机与动力装置,2020,37(02):12-17.

[7] 丁润琦,甄国涌,张凯华.温度传感器S型热电偶测温电路设计[J].中国测试,2020,46(01):99-104.

[8] 李刚,程立君,林凌.高精度数据采集中抗混叠滤波器的设计[J].国外电子元器件,2007(08):30-33+38.

[9] 宋金玲,姜苏,杜钟祥,等.多路信号的抗混叠滤波器设计[J].科学技术创新,2020(28):6-9.

[10] 程心怡,任勇峰,贾兴中.基于多种类型热电偶的分层测温电路设计[J].电子测量技术,2020,43(17):143-147.

[11] 徐健,林皓琨,肖新帅.基于N型热电偶的智能化多通道测温系统[J].电子测量技术,2019,42(08):127-131.

备注/Memo:: 收稿日期：2022-06-03

基金项目：
国家自然科学基金资助项目（NO.51875534）；
山西省“1331工程”重点学科建设项目资助

作者简介：
周广兴（1996），男，硕士研究生，主要研究方向为电路与系统应用。

通信作者：
淑靖（1974）女，博士，教授，主要研究方向为感知与探测，信号处理。

更新日期/Last Update: 1900-01-01