|本期目录/Table of Contents|

[1]耿昕龙,张 旭.阻抗模型下的采摘机器人末端柔顺抓取力控制方法研究[J].工业仪表与自动化装置,2024,(04):52-56.[doi:DOI:10.19950/j.cnki.cn61-1121/th.2024.04.011]
　GENG Xinlong,ZHANG Xu.Research on the control method of the flexible grasping force of the end of a picking robot under the impedance model[J].Industrial Instrumentation & Automation,2024,(04):52-56.[doi:DOI:10.19950/j.cnki.cn61-1121/th.2024.04.011]
点击复制

阻抗模型下的采摘机器人末端柔顺抓取力控制方法研究(PDF)

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:
期数:
2024年04期
页码:
52-56
栏目:
出版日期:
2024-08-15

文章信息/Info

Title:
Research on the control method of the flexible grasping force of the end of a picking robot under the impedance model
文章编号:
1000-0682（2024）04-0052-05
作者:
耿昕龙; 张 旭
（西安核设备有限公司，陕西 西安 710000）
Author(s):
GENG Xinlong;  ZHANG Xu
(Xi’an Nuclear Equipment Co., Ltd, Shaanxi Xi’an 710000, China)
关键词:
阻抗模型; 采摘机器人; 抓取力; 电机转矩; 电机转速; 位置控制器
Keywords:
impedance model;  picking robots;  grasping force;  motor torque;  motor speed;  position controller
分类号:
TP242
DOI:
DOI:10.19950/j.cnki.cn61-1121/th.2024.04.011
文献标志码:
A
摘要:
果蔬采摘是一项复杂且耗时的任务，需要处理各种动态、不规则的果蔬形状和位置，同时保证果蔬的完整性和新鲜度。因为常规采摘控制方法效率低下，而且容易造成果实损伤，为此，提出一种阻抗模型下的采摘机器人末端柔顺抓取力控制方法。以采摘机器人末端柔顺抓取稳定性为约束条件，根据运动学原理分析手指末端电机的电磁转矩与转速间的关系，利用毕奥-萨伐尔定律获取抓取力控制信号。基于阻抗模型、二阶系统设计抓取力控制器，通过二阶低通滤波器调节电机运转，得出机器人抓取的期望位置、速度及加速度，完成抓取力控制任务。实验结果表明，阻抗模型可应用于各种果蔬采摘场景，且末端柔顺抓取力控制误差小，稳定性高，解决果蔬采摘存在的难题，推动农业生产的现代化和智能化。
Abstract:
Picking fruits and vegetables is a complex and time-consuming task that requires handling various dynamic and irregular shapes and positions of fruits and vegetables, while ensuring their integrity and freshness. Due to the low efficiency of conventional harvesting control methods and their susceptibility to fruit damage, a flexible grasping force control method for the end effector of harvesting robots under impedance model is proposed. Based on the constraint condition of flexible grasping stability at the end of the harvesting robot, the relationship between the electromagnetic torque and speed of the finger end motor is analyzed using kinematic principles. The grasping force control signal is obtained using the Biot Savart law. Design a gripping force controller based on impedance model and second-order system, adjust the motor operation through second-order low-pass filter, obtain the expected position, speed, and acceleration for robot gripping, and complete the gripping force control task. The experimental results show that the impedance model can be applied to various fruit and vegetable picking scenarios, and the control error of the end flexible grasping force is small, with high stability, solving the problems of fruit and vegetable picking, and promoting the modernization and intelligence of agricultural production.

参考文献/References:

[1]毕松,张潞.自然环境下的柑橘采摘点识别方法研究[J].计算机仿真,2021,38(12):227-231.

[2]黄才贵.基于机器视觉的百香果采摘分级机器人平台的设计[J].农业技术与装备,2022(01):54-56.
[3]姚莹.多自由度机器人抓取末端振动自动稳健性控制技术[J].机械制造与自动化,2023,52(04):164-168.
[4]张鹏伟,李学威.接触状态感知下分拣机器人抓取过程多参数挖掘控制技术[J].机械设计与研究,2023,39(05):24-28+33.
[5] ZUO W, SONG G, CHEN Z. Grasping force control of robotic gripper with high stiffness[J]. IEEE/ASME Transactions on Mechatronics, 2021, 27(2):1105-1116.
[6] STOLFI A, GASBARRI P, MISRA A K. A two-arm flexible space manipulator system for post-grasping manipulation operations of a passive target object[J]. Acta Astronautica, 2020, 175(Oct):66-78.
[7]张静,杜博,李昌璐,等.苹果采摘机器人末端设计及运动仿真[J].液压气动与密封,2023,43(06):20-25.
[8]张之红.分裂迭代算法在采摘机器人运动控制中的应用[J].农机化研究,2023,45(11):199-203.
[9]王文远,富荣昌,曹富.基于动捕对仿人采摘机械臂运动学分析与仿真[J].农机化研究,2023,45(03):8-16.
[10]程培宝,康满仓.未知时变环境下采摘机器人电液伺服控制系统[J].机械与电子,2023,41(03):55-59+64.
[11]孙永芳.基于STM32的水果采摘机器人控制系统设计与实现[J].农业工程,2022,12(02):43-47.
[12]李小斌,吴宏岐,陈渭红,等.一种苹果采摘机器人关节伺服控制系统设计及仿真[J].计算机测量与控制,2021,29(03):129-134.

相似文献/References:

备注/Memo

备注/Memo:
收稿日期：2024-02-26第一作者：耿昕龙（2000—），男，汉族，陕西渭南人，本科，助理工程师，研究方向为基于PLC系统的大型机械设备仪控部分的安装以及精度调试。E-mail：Gengxinl123@163.com
更新日期/Last Update: 1900-01-01