«上一篇/Previous Article|本期目录/Table of Contents|下一篇/Next Article»

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:

期数:

2016年05期

页码:

78-80

栏目:

出版日期:

2016-10-15

文章信息/Info

Title:

Research of servo motion mode based on LabVIEW

文章编号:

1000-0682(2016)05-0000-00

作者:

雷 梁; 冉从军; 蒋冰霜; 魏琼林

（成都中科唯实仪器有限责任公司，成都 610041）

Author(s):

LEI Liang; RAN Congjun; JIANG Bingshuang; WEI Qionglin

（Chengdu CAS Instrument Co..Ltd Chengdu， Sichuan Province.610041

关键词:

伺服运动; LabVIEW; 人机交互; 调用库函数

Keywords:

servo motion;  LabVIEW;  human–computer interaction;  call library function

分类号:

TP273

DOI:

-

文献标志码:

A

摘要:

研究伺服运动日常控制模式中最常用的点动、固定步长、扫描3种模式，并总结其规律性。同时运用LabVIEW这种先进的测控软件实现对运动的监控。控制模块简化了控制设计流程，同时还实现了远程网络多轴运动控制。多个项目的移植测试结果表明，该文分析和建立的3种独立的伺服运动模块可以在单轴运动控制中采用，也可以在多轴运动控制系统中采用。而基于LabVIEW软件的可视化界面能够运用VI动态调用的方式，提供给其他VI设计。

Abstract:

In research of the most common 3 control modes of the servo movement:Crawl、Fixed step、Scanning.Summarizing its regularity.`At the same time,using the advanced measurement and control software such as LabVIEW to realize the monitoring of the movement.The control module simplifies the control design process,and realizes the multi axis motion control through remote network.The test results for multiple projects indicated: this three independent servo motor modules which are analyzed and established in this paper ,can be used in single axis motion control,also can be used in multi axis motion control system.The visual interface based on LabVIEW can be used in the way of dynamic invocation of VI,and other VI design.

参考文献/References:

[1] 陈学树,刘萱.LabVIEW宝典[M].北京:电子工业出版社, 2011.

相似文献/References:

[1]王树东,孙 野,梁国栋,等.基于LabVIEW的高速数据采集系统设计[J].工业仪表与自动化装置,2014,(04):32.
　WANG Shudong,SUN Ye,LIANG Guodong,et al.Design of the high-speed data acquisition system based on LabVIEW[J].Industrial Instrumentation & Automation,2014,(05):32.
[2]王树东,何 明.关于LabVIEW采集系统的数据存储[J].工业仪表与自动化装置,2014,(05):95.
　WANG Shudong,HE Ming.Acquisition system stored on LabVIEW[J].Industrial Instrumentation & Automation,2014,(05):95.
[3]刘荣荣.基于LabVIEW的自动锯床位置控制系统的设计[J].工业仪表与自动化装置,2014,(06):34.
　LIU Rongrong.The design on the controlled position system of automatic saw on LabVIEW[J].Industrial Instrumentation & Automation,2014,(05):34.
[4]孟文俊a,徐光华a,b,等.基于LabVIEW的滚动轴承非平稳过程监测诊断及性能评估系统的开发[J].工业仪表与自动化装置,2015,(02):18.
　MENG Wenjuna,XU Guanghuaa,b,et al.Development of non-stationary process for rolling bearing fault diagnosis and performance evaluation system based on LabVIEW[J].Industrial Instrumentation & Automation,2015,(05):18.
[5]梁 琛,贾远温,王晓兰.基于LabVIEW的输电线路工频参数测量系统设计[J].工业仪表与自动化装置,2015,(02):26.
　LIANG Chen,JIA Yuanwen,WANG Xiaolan.The design on measure system for transmission lines power frequency parameters based on LabVIEW[J].Industrial Instrumentation & Automation,2015,(05):26.
[6]赵媛媛,陈 捡,王晓侃.基于虚拟仪器的温度检测系统设计[J].工业仪表与自动化装置,2015,(04):38.
　ZHAO Yuanyuan,CHEN Jian,WANG Xiaokan.Design of temperature detection, system based on virtual instruments[J].Industrial Instrumentation & Automation,2015,(05):38.
[7]白 璘,惠 萌,武奇生.城市轨道交通ATP仿真实验装置设计与开发[J].工业仪表与自动化装置,2015,(04):68.
　BAI Lin,HUI Meng,WU Qisheng.Design and development of urban railway ATP stimulation experiment device[J].Industrial Instrumentation & Automation,2015,(05):68.
[8]牟玉喆,潘 鑫,高金吉*,等.基于LabVIEW的不平衡振动信号相位实时提取方法研究[J].工业仪表与自动化装置,2015,(05):17.
　MOU Yuzhe,PAN Xin,GAO Jinji,et al.Research on the phase real-time extraction methods for imbalance vbration signa based on the Labview platform[J].Industrial Instrumentation & Automation,2015,(05):17.
[9]孙茂元,王新兵,左都罗,等.基于LabVIEW的液滴喷射图像采集和分析系统[J].工业仪表与自动化装置,2015,(05):25.
　Sun Maoyuan,Wang Xinbing,Zuo duluo,et al.Liquid droplet jetting image acquisition and analysis system based on Labview[J].Industrial Instrumentation & Automation,2015,(05):25.
[10]刘荣荣.基于LabVIEW的散热器性能测试系统的设计[J].工业仪表与自动化装置,2016,(01):53.
　LIU Rongrong.The design of radiator performance testing system based on LabVIEW[J].Industrial Instrumentation & Automation,2016,(05):53.

备注/Memo

备注/Memo:

收稿日期：2015-11-12

作者简介：雷梁（1981），男，湖北宜昌人，硕士，工程师，研究方向为电力电子与电力传动。

常用功能

更新日期/Last Update: 1900-01-01