|本期目录/Table of Contents|

[1]宫 浩.基于BMC156的矿用测斜仪测量单元设计[J].工业仪表与自动化装置,2019,(05):48-52.[doi:1000-0682(2019)05-0000-00]
 GONG Hao.Design of measuring unit for mine inclinometer based on BMC156[J].Industrial Instrumentation & Automation,2019,(05):48-52.[doi:1000-0682(2019)05-0000-00]
点击复制

基于BMC156的矿用测斜仪测量单元设计

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:
期数:
2019年05期
页码:
48-52
栏目:
出版日期:
2019-10-15

文章信息/Info

Title:
Design of measuring unit for mine inclinometer based on BMC156
作者:
宫 浩
中煤科工集团西安研究院有限公司,西安 710077
Author(s):
GONG Hao
CCTEG Xi’an Research Institute,Xi’an 710077,China
关键词:
矿用测斜仪六轴电子罗盘数据采集误差分析误差补偿
Keywords:
mine inclinometer six-axis electronic compass data acquisition error analysis error compensation
分类号:
TD76
DOI:
1000-0682(2019)05-0000-00
文献标志码:
A
摘要:
设计了一种基于六轴电子罗盘的矿用测斜仪测量单元,论述了测斜仪的测量原理并对测量单元的整体结构进行了设计。重点论述了基于BMC156电子罗盘的硬件电路和软件系统的设计方案,同时分析了钻孔轨迹测量过程中的误差分类及来源,分别论述了磁方位角误差与倾角和方位角误差的模型及其补偿和标定方法。通过标定试验,证明测量单元具有体积小、精度高、电路简单的特点,为后续钻孔测量类设备的研究与开发提供了有力支撑。
Abstract:
A measuring unit of mine inclinometer based on six-axis electronic compass is designed. The measuring principle of the inclinometer is discussed, and the overall structure of the measuring unit is designed. The design scheme of hardware circuit and software system based on BMC156 electronic compass is emphatically discussed. At the same time, the error classification and source in the course of drill hole trajectory measurement are analyzed. The models of magnetic azimuth error and inclination error and azimuth error, as well as their compensation and calibration methods are discussed respectively. Through calibration test, it is proved that the measuring unit has the characteristics of small size, high precision and simple circuit, which provides a strong support for the research and development of follow-up drilling measuring equipment.

参考文献/References:

[1] 王岚.钻孔测斜技术发展现状及展望[C].安全高效煤矿地质保障技术及应用,2007:390–392.

[2] 周静,胡毅,付浩.三轴重力加速度传感器标定方法研究[J].石油仪器,2010(8): 44-46.
[3] 刘武发,蒋蓁,龚振邦.基于MEMS加速度传感器的双轴倾角计及其应用[J].传感器技术,2005,24(3): 86-88.
[4] 刘建强,汪小华,林新华,等.三维磁感式电子罗盘的研制与标定[J].仪表技术与传感器,2012(6):19-21.
[5] 郭爱煌,薛忍霞.矿井全方位钻孔测斜仪的数值计算与误差校正[J].物探化探计算技术,1997,19(1): 50-55.
[6] 江浩,燕斌.基于PNI磁感式传感器的钻孔测斜仪的研究[J].煤田地质与勘探,2016,44(4): 132-135.
[7] 徐涛,温东,孙晓磊.基于加速度计和磁强计的方位测量与校正技术研究[J].仪器仪表学报,2009,30(10): 2018-2022.
[8] 郭爱煌,傅君眉.基于地球重力场和磁场测量的测斜技术[J].仪器仪表学报,2001,22(4):400–403.
[9] Bosch Sensortec.BMC156 6-axis ecompass data sheet.pdf [EB/OL]. http: / / www.bosch-sensortec.com
[10] 郭敏,尹光洪,田曦,等.基于三轴加速度计的倾斜角传感器的研究与设计[J].现代电子技术,2010,33(8):173-177.
[11] 付士民,孙立凯,于建楠,等.高精度磁罗经传感器设计[J].传感器与微系统,2016,35(1):104-106.
[12] 刘诗斌,冯晓毅,李宏.基于椭圆假设的电子罗盘误差补偿方法[J].传感器技术,2002,21(10):28-30.
[13] 李继华,王骏,陈忠强.连续测斜仪测量校正方法研究与应用[J].石油仪器,2010(4): 40-42.
[14] 樊依林.基于磁感式传感器的随钻测斜仪的研究[J]. 工业仪表与自动化装置,2018(3):112-115.

相似文献/References:

备注/Memo

备注/Memo:
收稿日期:2019-01-21
作者简介:宫浩(1987),男,陕西西安人,硕士研究生,工程师,主要从事地球物理勘探仪器和方法的研究工作。
更新日期/Last Update: 1900-01-01