|本期目录/Table of Contents|

[1]姜 帅,杨 威,胡俊宏,等.热电偶时间常数测量分拣系统研究[J].工业仪表与自动化装置,2021,(03):30-34.[doi:10.19950/j.cnki.cn61-1121/th.2021.03.006]
 JIANG Shuai,Yang Wei,Hu JunHong,et al.Research on measurement system of thermocouple time constant[J].Industrial Instrumentation & Automation,2021,(03):30-34.[doi:10.19950/j.cnki.cn61-1121/th.2021.03.006]
点击复制

热电偶时间常数测量分拣系统研究

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:
期数:
2021年03期
页码:
30-34
栏目:
出版日期:
2021-06-15

文章信息/Info

Title:
Research on measurement system of thermocouple time constant
作者:
姜 帅1杨 威2胡俊宏1夏春明3王旭东1
1.沈阳工业大学 机械工程学院,沈阳 110870;
2.北京航天自动控制研究所,北京 100854;3.沈阳东大传感技术有限公司,沈阳 110117
Author(s):
JIANG Shuai1Yang Wei2Hu JunHong1XIA Chunming3 WANG Xu-dong1
1. School of Mechanical Engineering,Shenyang University of Technology,Shenyang 110870,China;2. Beijing Aerospace Automatic Control Institute, Beijing 100854,China;3 Shenyang Dongda Sensor Technology Co.,Ltd.,Shenyang 110117, China
关键词:
热电偶时间常数测量系统PLC非线性拟合
Keywords:
thermocouple time constant measurement system PLC nonlinear fitting
分类号:
TH9
DOI:
10.19950/j.cnki.cn61-1121/th.2021.03.006
文献标志码:
A
摘要:
针对工业生产热电偶温度传感器人工测量其时间常数时劳动强度大、测试精度低且可靠性较差等问题,该文设计了一种基于PLC与计算机相结合的热电偶时间常数测量系统。提出了三种时间常数测量算法,并利用K型热电偶温度传感器对3种算法进行实验对比。实验结果表明:采用非线性最小二乘拟合法得出的时间常数结果最具有参考价值。经过试生产验证,该系统可实现热电偶时间常数测量与分拣的全自动化过程,且自动化程度较高,对提高产品生产率及产品质量、改善工人劳动环境具有重要意义。
Abstract:
Aiming at the problems of high labor intensity,low accuracy and poor reliability of industrial thermocouple time constant measurement,a thermocouple time constant measurement system based on PLC and computer is designed.Three kinds fo time constant measurement algorithms are proposed and compared by using K-type thermocouple temperature sensor.The experimental results show that the time constant obtained by the nonlinear least square fitting method has the most reference value. It is proved by trial production that the system can realize the automatic process of thermocouple time constant measurement and sorting,which is of great significance to improve the productivity and quality of products and improve the working environment of workers.

参考文献/References:

[1] 贾超,蔡杰,熊朝辉.一种温度传感器及动态校准方法[J].中国科技信息,2017(23):56-57.

[2] 郝晓剑,李科杰,刘健,等.基于CO2激光器的温度传感器可溯源动态校准[J].兵工学报,2009,30(02):156-159.
[3] 周洪琴,刘仁聪,文东海.单芯铠装热电偶的应用[J].仪器仪表标准化与计量,2008(04):45-48.
[4] 王向创,宾鸿伟,马金华.热电偶测温原理及在石灰窑中的应用[J].耐火与石灰,2012,37(02):12-13+19.
[5] 聂鹏程.热电偶对连铸坯表面温度测量的研究[D].沈阳:东北大学,2015.
[6] 吴方,杨新圆,王莉.表面温度传感器时间常数测量方法研究[J].计测技术,2014,34(04): 60-62.
[7] 程冬.浅析热电偶传感器的测温原理[J].景德镇学院学报,2016,31(06):6-8.
[8] 刘纪生.热电偶的动态响应误差的补偿[J].计量技术,1981(03):22-25+19.
[9] 段向港,郝晓剑.热电偶时间常数测试中阶跃温升信号的研究[J].激光技术,2018,42(02):192-195.
[10] 刘亭剑,郝晓剑.热电偶时间常数激光测试系统中激光加热研究[J].激光技术,2019,43(02):251-255.
[11] 郝晓剑,王萌萌.热电偶时间常数测试系统[J].仪表技术与传感器,2018(05):70-73.
[12] 颜湘武,王俣珂,贾焦心,等.基于非线性最小二乘曲线拟合的虚拟同步发电机惯量与阻尼系数测量方法[J].电工技术学报,2019,34(07):1516-1526.

相似文献/References:

[1]王丰元,钟 健,杨立超,等.基于STM32单片机的卡车制动器温度无线监测系统设计[J].工业仪表与自动化装置,2017,(06):65.[doi:1000-0682(2017)06-0065-05]
 WANG Fengyuan,ZHONG Jian,YANG Lichao,et al.Design of wireless monitoring system for brake temperature based on STM32 micro-controller[J].Industrial Instrumentation & Automation,2017,(03):65.[doi:1000-0682(2017)06-0065-05]
[2]张 进,姜志恒,温铁钝.某气流总温传感器动态特性仿真及相关影响因素分析[J].工业仪表与自动化装置,2020,(01):61.
 ZHANG Jin,JIANG Zhiheng,WEN Tiedun.Transient behavior simulation and relevant influencing factor analysis for an airflow total-temperature sensor[J].Industrial Instrumentation & Automation,2020,(03):61.

备注/Memo

备注/Memo:
收稿日期:2020-07-24

作者简介:
姜帅(1993),男,吉林,硕士研究生,主要从事机电一体化产品研究等。
更新日期/Last Update: 1900-01-01