|本期目录/Table of Contents|

[1]李欣玉,范蟠果.应用于三菱PLC的CAN总线通信转换装置研究[J].工业仪表与自动化装置,2021,(03):134-137.[doi:10.19950/j.cnki.cn61-1121/th.2021.03.029]
 LI Xinyu,FAN Panguo.Research on CAN bus communication conversion device applied to Mitsubishi PLC[J].Industrial Instrumentation & Automation,2021,(03):134-137.[doi:10.19950/j.cnki.cn61-1121/th.2021.03.029]
点击复制

应用于三菱PLC的CAN总线通信转换装置研究

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:
期数:
2021年03期
页码:
134-137
栏目:
出版日期:
2021-06-15

文章信息/Info

Title:
Research on CAN bus communication conversion device applied to Mitsubishi PLC
作者:
李欣玉范蟠果
西北工业大学 自动化学院,陕西 西安 710129
Author(s):
LI Xinyu1FAN Panguo2
College of Automation, Northwestern Polytechnical University, Shaanxi Xi’an 710129, China
关键词:
CAN总线FX PLC微控制器通信转换串行通信
Keywords:
CAN busFX PLCmicrocontrollercommunication conversionserial communication
分类号:
TP23 TP336
DOI:
10.19950/j.cnki.cn61-1121/th.2021.03.029
文献标志码:
A
摘要:
首先介绍了CAN总线技术的发展概况及基本原理。在CAN总线技术广泛应用的背景下,为了降低三菱FX系列PLC使用CAN总线组网的成本,提出一种基于PIC18F25微控制器的通信转换装置。该转换装置实现了CAN通信协议与三菱PLC专用协议的转换,采用三个拨码开关设置CAN通信参数和串行通信参数,操作人员可根据实际情况灵活调整装置通信相关的参数。相较于三菱公司为PLC适配的CAN总线模块,该装置成本低廉、操作简单且通用性强,可以使三菱FX系列所有型号的PLC通过自带的通用串口接入CAN总线网络。
Abstract:
Firstly, the development and basic principle of CAN bus technology are introduced. Under the background of wide application of CAN bus technology, in order to reduce the cost of Mitsubishi FX series PLC networking based on CAN bus, proposing a communication conversion device based on PIC18F25 microcontroller. The device realizes the conversion between CAN communication protocol and Mitsubishi PLC proprietary protocol. Three dial switches are used to set CAN communication parameters and serial communication parameters. The operator can flexibly adjust the communication parameters of the device according to the actual situation. Compared with the CAN bus module produced by Mitsubishi Corporation, the device has the advantages of lower cost, more simple operation and stronger versatility. It can make all types of FX PLC connect to CAN bus network through its own universal serial port.

参考文献/References:

[1]贺毅,赵望达,刘勇求.现场总线技术应用及其发展趋势探讨[J].工业计量,2005(01):21-23.

[2]刘广.PLC控制技术发展研究[J].建筑工程技术与设计,2018(27):2682.
[3]王保中,涂亚庆,张丽娟.工业以太网与CAN现场总线比较和应用方案分析[J].工业仪表与自动化装置,2006(05):11-13.
[4]陈娅娟,孙汉旭,贾庆轩,等.一种新型冗余CAN网络通信协议栈的研制[J].测控技术,2007(11):45-48.
[5]何宝福,张文红.CAN-RS232通信转换模块的设计与实现[J].电子设计工程,2007(04):17-19.
[6]夏巍,丁刚,严辉.基于CAN总线和嵌入式网关的家庭智能控制网络[J].工业仪表与自动化装置,2008,2008(06):29-31+38.

相似文献/References:

[1]严 辉,方 正.基于CAN总线的门禁读卡控制器设计[J].工业仪表与自动化装置,2016,(04):64.
 YAN Hui,FANG Zheng.The design of the access control card reader based on CAN bus[J].Industrial Instrumentation & Automation,2016,(03):64.
[2]金洪吉.基于CAN总线的数字可调电源系统[J].工业仪表与自动化装置,2017,(03):85.
 JIN Hongji.The digital adjustable power supply based on CAN bus[J].Industrial Instrumentation & Automation,2017,(03):85.
[3]官国栋,安世奇.LED集鱼灯控制系统的设计与实现[J].工业仪表与自动化装置,2017,(04):84.
 GUAN Guodong,AN Shiqi.Design and implementation of distributed control system in LED[J].Industrial Instrumentation & Automation,2017,(03):84.
[4]张 鑫,张向顺,赵惟诚,等.基于DSP和CAN的机电环境设备监控系统模块化设计[J].工业仪表与自动化装置,2021,(06):21.[doi:10.19950/j.cnki.cn61-1121/th.2021.06.004]
 ZHANG Xin,HANG Xiangshun,ZHAO Weicheng,et al.Modular design of mechanical and electrical environment equipment monitoring system based on DSP and CAN[J].Industrial Instrumentation & Automation,2021,(03):21.[doi:10.19950/j.cnki.cn61-1121/th.2021.06.004]
[5]尹恩华,高振天,孙 奎.站台门门控单元远程在线程序升级技术设计与实现[J].工业仪表与自动化装置,2022,(02):62.[doi:10.19950/j.cnki.cn61-1121/th.2022.02.013]
 YIN Enhua,GAO Zhentian,SUN Kui.Design and implementation of remote online program upgrade technology for platform screen door control unit[J].Industrial Instrumentation & Automation,2022,(03):62.[doi:10.19950/j.cnki.cn61-1121/th.2022.02.013]

备注/Memo

备注/Memo:
收稿日期:2020-12-02

作者简介:
李欣玉(1999),女,陕西省西安市人,电气工程及其自动化专业本科生,主要研究方向为电气测试、嵌入式技术。
更新日期/Last Update: 1900-01-01