|本期目录/Table of Contents|

[1]迟 淼,王 晶,李家勋,等.共享单车立体停放系统设计[J].工业仪表与自动化装置,2023,(03):12-16+47.[doi:10.19950/j.cnki.cn61-1121/th.2023.03.003]
　CHI Miao,WANG Jing,LI Jiaxun,et al.Design of three-dimensional parking system for shared bikes[J].Industrial Instrumentation & Automation,2023,(03):12-16+47.[doi:10.19950/j.cnki.cn61-1121/th.2023.03.003]
点击复制

共享单车立体停放系统设计

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:
期数:
2023年03期
页码:
12-16+47
栏目:
出版日期:
2023-06-15

文章信息/Info

Title:
Design of three-dimensional parking system for shared bikes
文章编号:
1000-0682（2023）02-0012-05
作者:
迟 淼; 王 晶; 李家勋; 刘泮布; 薛雨佳; 陈 伟; 王智鹏
沈阳航空航天大学 自动化学院，辽宁 沈阳 110136
Author(s):
CHI Miao; WANG Jing;  LI Jiaxun;  LIU Panbu;  XUE Yujia;  CHEN Wei;  WANG Zhipeng
School of Automation, Shenyang Aerospace University, Liaoning Shenyang 110136, China
关键词:
共享单车; 人机交互; 51单片机; 立体车库
Keywords:
Bike sharing;  Interactive;  51 MCU;  Three-dimensional garage
分类号:
TM935
DOI:
10.19950/j.cnki.cn61-1121/th.2023.03.003
文献标志码:
A
摘要:
随着共享经济飞速发展，共享自行车应运而生，其给用户带来便利的同时也引发了停放难等问题。为了提高自行车存放数量、降低土地占用率，该文设计了一种共享单车立体存放系统。系统总体分为单片机模块、传感器采集模块、电机控制模块等几部分。光电传感器和压力传感器采集停车场车辆和车位信息，将信号传递给单片机，单片机产生控制信号，电机执行命令，带动机械结构，进而实现车辆的停放。系统在PROTUES软件中进行了模拟调试，可以有效实现自行车停放，为解决当今城市交通拥堵问题，降低能源、资源、经济等方面的损耗提供了思路。
Abstract:
With the rapid development of sharing economy, shared bicycles come into being, which not only brings convenience to users, but also causes problems such as difficult parking. In order to increase the number of bicycle storage and reduce the land occupancy rate, this paper designs a three-dimensional storage system for shared bicycles. The system is divided into MCU module, sensor acquisition module, motor control module and so on. The photoelectric sensor and pressure sensor collect the information of vehicles and parking Spaces in the parking lot, and transmit the signal to the MCU, which generates the control signal, and the motor executes the command to drive the mechanical structure, so as to realize the parking of vehicles. The system is simulated and debugged in PROTUES software, which can effectively realize bicycle parking, providing ideas for solving the problem of urban traffic congestion and reducing the loss of energy, resources, economy and other aspects.

参考文献/References:

[1] 颜伟平,王兵,刘凯等.自行车智能立体车库控制系统设计[J].机电一体化,2020,26(04):45-50.

[2]李腾飞,张占领,沈华刚.基于PLC的新型智能立体车库的设计[J].饮食科学,2018(04):163.?div>[3]谭嘉,吴启舟,毕仁贵,等.一种立体循环式自行车停车装置的设计优化[J].机电信息,2020(27):107+109.?div>[4]桓源,任工昌.双层立式自行车停车装置的设计[J].机械设计,2021,38(S1):18-21.
[5]李璐.自动立体车库涉及[J].中国设备工程,2018(21):122-123.
[6] 林海滨,张镐.基于H桥控制直流电机驱动电路设计[J].家电科技,2018(05):42-45.
[7] 赵鹏,钱美,李帅波.单片机PID电机转速与位置控制系统设计[J].工业仪表与自动化装置,2022(04):24-27+44.
[8] 陈炜炜,詹跃东.基于单片机的直流电机PWM调速系统[J].化工自动化及仪表,2019,46(03):218-222.
[9]李文进,向志军.基于STC89C52单片机实现的三相半波可控整流电路相控系统[J].黑龙江科技信息,2013(31):27.
[10] 陈露,李凌.直流电机转速系统控制方法仿真研究[J].工业仪表与自动化装置,2021(05):29-34.
[11] 盛碧琦,胡云琴,应忠于.基于AVR单片机的定量称重系统设计[J].工业仪表与自动化装置,2015(05):59-61+64.
[12] REX S R , PRABA D . Design of PWM with Four Transistor Comparator for DC–DC Boost Converters[J]. Microprocessors and Microsystems, 2019(03):72.
[13] ZL A , LEI M . Automated stereo-garage with multiple cache parking spacesStructure, system and scheduling performance[J]. Automation in Construction, 2020(02):119.

相似文献/References:

[1]雷 梁,冉从军,蒋冰霜,等.基于LabVIEW监控的伺服运动模式研究[J].工业仪表与自动化装置,2016,(05):78.
　LEI Liang,RAN Congjun,JIANG Bingshuang,et al.Research of servo motion mode based on LabVIEW[J].Industrial Instrumentation & Automation,2016,(03):78.
[2]丁 涛,胡佳慧.基于LINUX的远程实时监控系统设计与实现[J].工业仪表与自动化装置,2018,(01):47.[doi:1000-0682（2018）01-0000-00]
　DING Tao,HU Jiahui.The design and implementation of remotereal-time monitoring system based on LINUX[J].Industrial Instrumentation & Automation,2018,(03):47.[doi:1000-0682（2018）01-0000-00]
[3]李大伟.基于PLC的传统冲压机床自动化改造的研究[J].工业仪表与自动化装置,2020,(05):97.[doi:1000-0682(2020)05-0000-00]
　LI Dawei.Research on the automation transformation of traditional stamping machine based on PLC[J].Industrial Instrumentation & Automation,2020,(03):97.[doi:1000-0682(2020)05-0000-00]

备注/Memo

备注/Memo:
收稿日期：2023-02-27

基金项目：
大学生创新创业训练计划项目(X202210143110)

第一作者：
迟淼(2003—)，男，本科生。通信作者：王晶(1989—)，女，硕士，实验师，主要研究方向为嵌入式系统、实验室管理与实验教学研究。
更新日期/Last Update: 1900-01-01