|本期目录/Table of Contents|

[1]熊远生,吴伟雄.高效水位传感器自动测试系统的设计[J].工业仪表与自动化装置,2019,(02):33-35.[doi:1000-0682(2019)02-0000-00]
　XIONG Yuansheng,WU Weixiong.Design of an automatic and high efficiency test system for water level sensor[J].Industrial Instrumentation & Automation,2019,(02):33-35.[doi:1000-0682(2019)02-0000-00]
点击复制

高效水位传感器自动测试系统的设计

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:
期数:
2019年02期
页码:
33-35
栏目:
出版日期:
2019-04-15

文章信息/Info

Title:
Design of an automatic and high efficiency test system for water level sensor
作者:
熊远生; 吴伟雄
嘉兴学院 机电工程学院，浙江 嘉兴 314001
Author(s):
XIONG Yuansheng;  WU Weixiong
College of Mechanical & Electrical Engineering, Jiaxing University, Zhejiang Jiaxing 314001, China)
关键词:
水位传感器;  自动测试系统; 气压控制
Keywords:
water level sensor;  automatic test system;  air pressure control
分类号:
TP273
DOI:
1000-0682(2019)02-0000-00
文献标志码:
A
摘要:
设计了一种高效水位传感器自动测试系统，上位机通过USB转232接口连接气压控制器，通过气压控制器控制密闭气室的气压达到一个设定值，上位机通过MODBUS协议依次从频率表读出连在密闭气室上的水位传感器的实际频率，将该气压值下的期望频率减去实际频率得到频率误差，根据是否超出规定的误差范围来判断该水位传感器在该气压设定值是否合格。重复上述步骤，完成多个气压设定值下的水位传感器测试，如果水位传感器在所有气压设定值都合格，则判断该水位传感器合格，否则为不合格。结合计算机控制软件，能一次完成对多个水位传感器的测试。现场使用情况表明，该系统大大提高了水位传感器的测试效率。
Abstract:
An automatic and high efficiency water level sensor test system is designed. The upper computer connects the air pressure controller through the USB to 232 interface. The air pressure in the closed air chamber is controlled to the specified value, the upper computer reads the corresponding frequency of the water level sensor connected to the closed air chamber from the frequency meter in turn through the MODBUS protocol, and the desired frequency is subtracted from the actual frequency to get the frequency error under the specified air pressure value. Whether the water level sensor is qualified under the specified air pressure value according to whether or not it exceeds the specified error range. Repeat the above steps to complete the test of water level sensors under multiple specified air pressure values. If the water level sensor is qualified at all specified air pressure values, then the water level sensor is judged to be qualified, otherwise it is not qualified. Combined with computer control software, multiple water level sensors can be tested at one time. The field application shows that the system greatly improves the test efficiency of the water level sensor.

参考文献/References:

[1] 贾伯年,俞朴,宋爱国.传感器技术[M].南京:东南大学出版社,2008.

[2] 胡生清,左进,胡毅.水位传感器自动测试系统及误差分析[J]. 现代计量测试,1999 (3): 38-40.
[3] 徐冬寅.精密水位传感器测试系统研制[J].泰州职业技术学院学报, 2010, 10(1): 14-16.
[4] 吴秋芹,惠晶.精密水位传感器测试仪[J].机电工程技术, 2009, 38(5): 40-41.
[5] 叶露林,洪雪峰,王锡忠.精密压力测试仪[J].现代电子技术, 2007(24): 21-22.
[6] 李陶智,谢亚莲,张占波.新型高精度水位传感器性能测试系统[J].计算机系统应用,2012,21(07):147-150.

相似文献/References:

[1]孙智超,孙 炯,查美生.加热式差分热电阻水位传感器的研制与试验[J].工业仪表与自动化装置,2017,(03):58.
　SUN Zhichao,SUN Jiong,ZHA Meisheng.Development and test of the thermal differential RTD water level sensor[J].Industrial Instrumentation & Automation,2017,(02):58.

备注/Memo

备注/Memo:
收稿日期：2018-07-30
基金项目： 浙江省科技计划项目(2016C31083)
作者简介：熊远生(1979)，男，博士，副教授，主要研究方向为运动控制、新能源发电及控制等。
更新日期/Last Update: 2019-04-15