|本期目录/Table of Contents|

[1]王子权,陈伟男,黄 巍,等.基于MATLAB的多路温湿度测量系统软件设计[J].工业仪表与自动化装置,2023,(02):23-27.[doi:10.19950/j.cnki.cn61-1121/th.2023.02.005]
　WANG Ziquan,CHEN Weinan,HUANG Wei,et al.The software design of multi-channel temperature and humidity measurement system based on MATLAB[J].Industrial Instrumentation & Automation,2023,(02):23-27.[doi:10.19950/j.cnki.cn61-1121/th.2023.02.005]
点击复制

基于MATLAB的多路温湿度测量系统软件设计

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:
期数:
2023年02期
页码:
23-27
栏目:
出版日期:
2023-04-15

文章信息/Info

Title:
The software design of multi-channel temperature and humidity measurement system based on MATLAB
文章编号:
1000-0682（2023）02-0023-05
作者:
王子权; 陈伟男; 黄 巍; 高雪峰; 顾义畅; 姚潇骏; 项 贇
上海卫星装备研究所，上海 200240
Author(s):
WANG Ziquan;  CHEN Weinan;  HUANG Wei;  GAO Xuefeng;  GU Yichang;  YAO Xiaojun;  XIANG Yun
Shanghai Institute of Spacecraft Equipment, Shanghai 200240, China
关键词:
温湿度测量; 数据存储; MATLAB GUI; 软件设计; 串口通信
Keywords:
temperature and humidity measurement;  data storage;  MATLAB GUI software design;  serial communication
分类号:
TP311.5
DOI:
10.19950/j.cnki.cn61-1121/th.2023.02.005
文献标志码:
A
摘要:
为进行部组件级航天产品温湿度监测与实验研究，开发了一种通用温湿度测量系统上位机，其目的是将终端机发出的温湿度量进行可视化显示和存储。基于MATLAB GUI开发环境，采用RS232串口通信方式，以数据首字母A~P作为16路温度数据判断依据，数据保存为文本文件；以数据首字母a~p作为16路湿度数据判断依据，数据保存至文本文件。通过数据曲线显示界面和监测系统界面，将16路温度数据和16路湿度数据以实时曲线的形式显示在当前16路温度分布和湿度分布彩色图中；软件串口配置界面可配置串口通信的COM口、波特率、奇偶校验位、数据位和停止位；软件串口调试界面可以接收终端机数据，判断串口通信是否正常。经实验调试，该系统运行稳定，可应用于多种需温湿度监测现场。
Abstract:
In order to monitor the temperature and humidity of space products at the component level, the upper computer of a general temperature and humidity measurement system is developed, which aims at visualizing and storing the temperature and humidity measurement sent by the terminal. Based on MATLAB GUI development environment, RS232 serial communication mode was adopted. The first letter of data A~P was used as the basis for the judgment of 16-channel temperature data, and the data was saved as text files. Start with letters a to p as the basis for determining the 16-channel humidity data, and save the data to a text file. Through the data curve display interface and the monitoring system interface, the 16 channel temperature data and 16 channel humidity data can be displayed in the form of real-time curves in the current 16 channel temperature distribution and humidity distribution color map; COM port, baud rate, parity check bit, data bit and stop bit of serial communication can be configured in the serial port configuration interface of software. The serial port debugging interface of the software can receive data from the terminal to judge whether the serial port communication is normal. The experimental debugging proves that the system runs stably and can be applied to various temperature and humidity monitoring sites.

参考文献/References:

[1] 刘媛,王晓明,高辉,等.预防热循环试验中试件结露的方法及其除湿效果试验验证[J].航天器环境工程, 2021,38(01): 71-75.

[2] 程建,刘钰,张瀚文,等.航天组件级单机热循环试验过程防凝露试验技术探讨[J].环境技术, 2020,38(06): 26-29.
[3] 宋阳柳,易艺,郝建卫,等.基于STM32的中央空调温度控制器的设计[J].国外电子测量技术,2018,37(02): 125-128.
[4] 冯伦宇,张斌,冯晓苏.基于插管式的升降结构浅地层温度监测系统[J].电子测量技术,2020,43(04): 111-115.
[5] ZHANG Y,TAO L.Multi-Channel Data Acquisition System Based on FPGA and STM32[J].Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University, 2020,38(2): 351-358.
[6] ZHANG M,DU J.Design and development of smart socket based on STM32[J].Journal of Computational Methods in Sciences and Engineering, 2020,20(1): 227-243.
[7] BO L,DI X,CHEN G.Design of extensible multi-source signal acquisition device based on DSP and STM32[J]. 2019,61(1-2): 118-126.
[8] 张鹏.基于ARM的开关柜环境湿度检测及除湿系统[J]. 电子测量技术, 2019,42(07): 100-103.
[9] 范虹兴,高凤良,熊钰瑶,等.基于STM32的开关柜母线温度无线采集系统[J].仪表技术与传感器,2020(04): 77-80.
[10] 王子权,范燚,项贇,等.基于STM32的多路温湿度扫描检测系统设计[J].电子设计工程,2022,30(20):73-78.
[11] 曾建清.基于STM32的多功能空气质量监测系统设计 [D].成都:电子科技大学, 2019.
[12] 苏宝林.基于电容传感器的湿度检测系统的设计[J].仪表技术与传感器,2018(07): 58-60.
[13] 范宇聪,邓云,程敏,等.八通道的温度同步测量系统的设计[J].仪表技术与传感器, 2020(04): 61-67.
[14] 邱鹏程,李开宇,李磊,等.基于多传感器融合的高精度温度监测系统设计[J].电子测量技术,2020,43(03): 92-96.
[15] 宋玲玲,刘立群,司财勇,等.基于MATLAB GUI的《信号与系统》课程仿真实验平台设计[J].物联网技术,2022,12(09): 135-137+140.
[16] 梁海波,黄万伟,李浩,等.基于MATLAB GUI的测试数据比对分析软件设计[J].导弹与航天运载技术, 2022(04): 56-61.
[17] 陈梅,王健,宗广灯.基于Matlab GUI的倒立摆系统仿真 平台设计[J].现代电子技术, 2022,45(18): 143-147.
[18] 陈波,彭天好.基于MATLAB GUI的采煤机调高控制分析平台[J].煤矿机械, 2022,43(07): 158-160.

相似文献/References:

[1]范荫鹏,艾 红.具有软开关机功能的油田压力采集系统研究[J].工业仪表与自动化装置,2017,(03):42.
　FAN Yinpeng,AI Hong.Research on oilfield pressure acquisition system with software on-off[J].Industrial Instrumentation & Automation,2017,(02):42.
[2]张世综,徐世许,张万达.基于FINS协议的液体自动配料系统设计[J].工业仪表与自动化装置,2020,(02):42.
　ZHANG Shizong.Design of automatic liquid batching system based on FINS protocol[J].Industrial Instrumentation & Automation,2020,(02):42.
[3]才 旺,尹明德,肖 杰,等.基于LabVIEW的数据库访问技术在测试系统中的应用[J].工业仪表与自动化装置,2020,(04):77.[doi:1000-0682(2020)04-0000-00]
　CAI Wang,YIN Mingde,XIAO Jie,et al.Application of database access technology based on LabVIEW in test system[J].Industrial Instrumentation & Automation,2020,(02):77.[doi:1000-0682(2020)04-0000-00]
[4]和鹏祥,王黎明,李 璇,等.基于ZYNQ-7000的超声波信号采集系统设计[J].工业仪表与自动化装置,2024,(04):3.[doi:DOI:10.19950/j.cnki.cn61-1121/th.2024.04.001]
　HE Pengxiang,WANG Liming,LI Xuan,et al.Design of ultrasonic signal acquisition system based on ZYNQ-7000[J].Industrial Instrumentation & Automation,2024,(02):3.[doi:DOI:10.19950/j.cnki.cn61-1121/th.2024.04.001]

备注/Memo

备注/Memo:
收稿日期：2022-10-16?div>?一作者：
王子权（1996—），男，安徽亳州人，工学硕士，工程师，研究方向为卫星工程工艺设计，机电液一体化技术，嵌入式系统开发技术，先进控制算法及应用。
更新日期/Last Update: 1900-01-01