|本期目录/Table of Contents|

[1]王占光,李志刚,叶能魁.密炼机转子转速的过程控制研究[J].工业仪表与自动化装置,2015,(06):8.
 WANG Zhanguang,LI Zhigang,YE Nengkui.Process control research on the roter speed of internal mixer[J].Industrial Instrumentation & Automation,2015,(06):8.
点击复制

密炼机转子转速的过程控制研究(PDF)

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:
期数:
2015年06期
页码:
8
栏目:
出版日期:
2015-12-15

文章信息/Info

Title:
Process control research on the roter speed of internal mixer
文章编号:
1000-0682(2015)06-0000-00
作者:
王占光1李志刚1叶能魁2
(1. 南京理工大学,南京 210094;2. 正将自动化设备(江苏)有限公司,江苏 沭阳 223600)
Author(s):
WANG Zhanguang1LI Zhigang1YE Nengkui2
(1.Nanjing University of Science & Technology, Nanjing 215600, China;2.Zhang-Jiang?Automation(JiangSu)Co.,Ltd.,Jiangsu Shuyang 223600, China)
关键词:
密炼机转子转速等效模型模糊PID控制
Keywords:
internal mixer rotor speed equivalent model fuzzy PID control
分类号:
TP273+.3
DOI:
-
文献标志码:
A
摘要:
在混炼过程中调整转子转速,使得橡胶受热过程保持一致,利于混炼过程达到最优。该文叙述了转子转速的发展趋势,忽略周围介质和设备温升中热量的理想前提下,提出了胶料吸收热量的简化计算方法。建立了转速和胶料温度之间的关系,并根据控制系统的物理意义和响应特性类比导出等效模型。等效模型为惯性环节和延时环节的组合,对等效模型的控制进行仿真分析,证明采用常规PID和模糊控制相结合的控制策略效果较好。
Abstract:
Adjusting the rotor speed in the mixing process keeps the rubber heating process consistent, benefits to achieve the optimum mixing process.This paper descried the development trend of rotor speed, puts forward a calculation method of the heat absorbed by the rubber, established the relationship between the speed and temperature of the rubber, and simulatedthe equivalent model based on the physical meaning and response characteristics of the control system. Equivalent model is composed of inertial link and delay link,simulation analysis was carried out on the equivalent model control, prove that the combination of conventional PID and fuzzy control to the control strategy of the effect is better.

参考文献/References:

[1] 付向东,林仕栋.提高密炼机能量吸收的方法[J].橡胶工业, 2011(11):58.

[2] 汪传生.同步转子密炼机橡胶的理论和实验研究[D],北京:北京化工大学,2000.
[3] 王晓营.密炼机转子转速对白炭黑补强溶聚丁苯橡胶性能的影响[J].橡胶工业,2014(12):61.
[4] 李勇.优化密炼机上辅机系统 提高密炼机的炼胶效率[J].橡胶工业,2012(1):59.
[5] Ken-ichi Manabe, Xu Chen, Dai Kobayashi, et al. Development of In-process Fuzzy Control System for T- shape Tube Hydroforming[J].Procedia Engineering,2014, 81:2518-2523.
[6] Ying Wu,Hang Jiang,Min Zou.The Research on Fuzzy PID Control of the Permanent Magnet Linear Synchronous Motor[J].Physics Procedia,2012(24): 1311-1318.
[7] A Fadaei, K Salahshoor. Design and implementation of a new fuzzy PID controller for networked control systems[J]. ISA Transactions,2008,47(4): 351-361.
[8] Mo Xiaohui, Zhang Yi. Variable Frequency Water Intaking Fuzzy PID Control System[J].Sensors & Transducers, 2013,154 (7):201-208.
[9] Ping Zhou, Haiyan Liu, Kaishun Tan, et al. Application and Research of Fuzzy Control Simulation in Twin Screw Extruder[J]. Procedia Engineering, 2012(29): 542-546.

相似文献/References:

备注/Memo

备注/Memo:
收稿日期:2015-04-02
基金项目:江苏省科技支撑计划(BE2013113)
作者简介:王占光(1990),男,江苏连云港人,南京理工大学硕士研究,研究方向为机电液一体化。
更新日期/Last Update: 1900-01-01