|本期目录/Table of Contents|

[1]范蟠果,刘经纬,王超然,等.基于PLC的模糊PID冷却液温度控制系统的设计[J].工业仪表与自动化装置,2020,(01):69-72.
 FAN Panguo,LIU Jingwei,WANG Chaoran,et al.Design of fuzzy-PID coolant temperature control system based on PLC[J].Industrial Instrumentation & Automation,2020,(01):69-72.
点击复制

基于PLC的模糊PID冷却液温度控制系统的设计

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:
期数:
2020年01期
页码:
69-72
栏目:
出版日期:
2020-02-15

文章信息/Info

Title:
Design of fuzzy-PID coolant temperature control system based on PLC
作者:
范蟠果1刘经纬1王超然1刘晓航2
1.西北工业大学 自动化学院,西安 710129;2.国网铁岭供电公司,辽宁 铁岭 112000
Author(s):
FAN Panguo1LIU Jingwei1WANG Chaoran1LIU Xiaohang2
1. School of Automation, Northwestern Polytechnical University, Xi’an 710129, China;2. State Grid Tieling Power Supply Company, Liaoning Tieling 112000, China
关键词:
PLC模糊控制PID温度控制
Keywords:
PLC fuzzy control PID temperature control
分类号:
TP273
DOI:
-
文献标志码:
A
摘要:
功率设备在运行的时候对温度有着较高的要求,需要配合冷却系统保持预定工作温度才能正常运行,但冷却系统的冷却液温度控制的大惯性、多变量,以及时变参数等特性会导致控制速度慢、精度低等问题。该文提出一种基于PLC的模糊PID冷却液温度控制系统,介绍了系统硬件以及软件的设计。该设计应用PLC实现了对温度调节过程的实时控制和数据采集,系统中的模糊控制和PID调节均通过PLC来实现。实验结果表明,该系统运行稳定,调节速度快,误差小,并具有实时显示、数据保存等功能,可以使用该系统对需要降温的功率设备进行冷却及温度控制。
Abstract:
The power equipment has high temperature requirements during operation, and it needs to cooperate with the cooling system to maintain the predetermined working temperature to operate normally. However, the large inertia, multivariable, and time-varying parameters of the cooling system temperature control of the cooling system may cause control. Slow speed, low precision and other issues. In this paper, a fuzzy PID temperature control system based on PLC is proposed. The hardware and software design of the system is introduced. The design uses PLC to realize the real-time control and data acquisition of the temperature adjustment process. The fuzzy control and PID adjustment in the system. All of them are realized by PLC. The experimental results show that the system is stable in operation, fast in adjustment, small in error, and has functions such as real-time display and data saving. The system can be used for cooling and temperature control of power devices that need to be cooled.

参考文献/References:

[1] 董瑞洪,梁磊,任旭鹏.温度控制系统的无超调模糊PID控制器设计[J].科学技术与工程,2009,9(2):267-271.?

[2] 陶永华,尹怡欣,葛芦生.新型PID控制[M].北京:机械工业出版社,1999.
[3] 张钟俊.智能控制和智能控制系统[M].北京:机械工业出版社,1995.
[4] 文鹏,白瑞祥.基于PLC的模糊控制在造纸过程中的应用[J].自动化与仪表,2007(6):58-60.
[5] 杨平,邓亮,徐春梅,等.PID控制器参数整定方法及应用[M].北京:中国电力出版社,2016.
[6] 张国良.模糊控制机器MATLAB应用[M].西安:西安交通大学出版社,2002.
[7] 范军芳,王伟,许晓飞,等.模糊控制[M].北京:国防工业出版社,2017.
[8] 李国勇,何小刚,杨丽娟.过程控制系统[M].北京:电子工业出版社,2017.
[9] 黄友锐,曲立国. PID控制器参数整定与实现[M].北京:科学出版社,2010.
[10] 张贝克,尉龙,杨宁.组态软件基础与工程应用(易控INSPEC)[M].北京:机械工业出版社,2011.

相似文献/References:

[1]卢英俊,孙小方,潘海天,等.基于PLC和iFIX的乙腈变压精馏实验装置控制系统设计[J].工业仪表与自动化装置,2013,(05):28.
[2]莫慧芳,饶明辉,陈瑞,等.PLC变频调速恒压供水技术在某自来水厂中的应用[J].工业仪表与自动化装置,2013,(05):36.
[3]高敬更,陈欣,乔立凤,等.基于PLC的液压成型控制系统的设计[J].工业仪表与自动化装置,2013,(05):39.
[4]金萌时,魏中青,孔祥伟,等.一种用于闪频观察窗的直流步进电机控制系统设计[J].工业仪表与自动化装置,2013,(05):43.
[5]康 权,吕庆春,俞永江,等.基于Quantum PLC和iFix的低温多效海水淡化控制系统[J].工业仪表与自动化装置,2014,(05):17.
 KANG Quan,LV Qingchun,YU Yong-jiang,et al.Control system combining Quantum PLC with iFix for LT- MED[J].Industrial Instrumentation & Automation,2014,(01):17.
[6]汪宏武.基于西门子S7-200的RH精炼炉浸渍管维修台车的自动控制设计[J].工业仪表与自动化装置,2014,(06):47.
 WANG Hongwu.The automatic control design of RH refining furnace dip pipe repair car based on Siemens S7-200[J].Industrial Instrumentation & Automation,2014,(01):47.
[7]何 瑛.基于WinCC组态软件和S7-300 PLC的五效降膜蒸发器自动控制系统的设计[J].工业仪表与自动化装置,2015,(02):64.
 HE Ying.Design of five-effect falling film evaporator automatic control system based on WinCC & S7-300 PLC[J].Industrial Instrumentation & Automation,2015,(01):64.
[8]邹益民.S7-200 PLC与单片机间ModBus主从通信方式[J].工业仪表与自动化装置,2015,(03):19.
 ZOUou Yi-min.Research on master-slave communications between S7-200 PLC with SCM based on ModBus protocol[J].Industrial Instrumentation & Automation,2015,(01):19.
[9]李雪松,谌海云,刘晓露,等.基于Rockwell现场总线的观光缆车控制系统设计[J].工业仪表与自动化装置,2015,(03):33.
 LI Xuesong,CHEN Haiyun,LIU Xiaolu,et al.The design of the gondola control system bansed on Rockwell field bus[J].Industrial Instrumentation & Automation,2015,(01):33.
[10]王晓侃,上官建林,朱振伟.基于PIC16F877单片机的加热炉模糊控制系统设计与研究[J].工业仪表与自动化装置,2015,(03):59.
 WANG Xiaokan,SHUANGGUAN Jianlin,ZHU Zhenwei.Design and research of heating furnace fuzzy control system based on PIC16F877 MCU[J].Industrial Instrumentation & Automation,2015,(01):59.
[11]张 弛,吴明亮,吴明永.基于PLC的移动式抹灰砂浆搅拌站控制系统设计[J].工业仪表与自动化装置,2017,(06):33.[doi:1000-0682(2017)06-0033-04]
 ZHANG Chi,WU Mingliang,WU Mingyong.Design of control system of mobile plastering mortar mixing station based on PLC[J].Industrial Instrumentation & Automation,2017,(01):33.[doi:1000-0682(2017)06-0033-04]
[12]郝 佳,刘 军,李景彬.基于PLC的换热站自动控制系统研制[J].工业仪表与自动化装置,2018,(05):85.[doi:1000-0682(2018)05-0000-00]
 HAO Jia,LIU Jun,LI Jingbin.The development of heat exchange station automatic control system based on PLC[J].Industrial Instrumentation & Automation,2018,(01):85.[doi:1000-0682(2018)05-0000-00]

备注/Memo

备注/Memo:
收稿日期:2019-07-15
作者简介:范蟠果(1960),男,陕西西安人,硕士,副教授,主要从事计算机测控系统研究。
更新日期/Last Update: 2020-01-10