[1]李 艳*,石云波,赵 锐,等.一种压阻式传感器信号调理电路的设计[J].工业仪表与自动化装置,2024,(02):10-14.[doi:DOI:10.19950/j.cnki.CN61-1121/TH.2024.02.002]
　LI Yan*,SHI Yunbo,ZHAO Rui,et al.Design of a piezoresistive sensor signal conditioning circuit[J].Industrial Instrumentation & Automation,2024,(02):10-14.[doi:DOI:10.19950/j.cnki.CN61-1121/TH.2024.02.002]

点击复制

一种压阻式传感器信号调理电路的设计(PDF)

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:

期数:

2024年02期

页码:

10-14

栏目:

出版日期:

2024-04-15

文章信息/Info

Title:

Design of a piezoresistive sensor signal conditioning circuit

文章编号:

1000-0682（2024）02-0010-05

作者:

李 艳1*; 石云波1; 赵 锐1; 张志峰2

（1.中北大学 电子测试技术重点实验室，山西 太原 030051；2.山西北方机械制造有限责任公司，山西 太原 030051）

Author(s):

LI Yan1*; SHI Yunbo1; ZHAO Rui1; ZHANG Zhifeng2

(1. State Key Laboratory of Testing Technology，North University of China，Shanxi Taiyuan 030051，China；2. SHANXI NORTH MACHINE-BUILDING CO.,LTD.，Shanxi Taiyuan 030051，China）

关键词:

压阻式; 信号调理; 放大; 滤波; 灵敏度

Keywords:

piezoresistive; signal conditioning; amplification; filtering; sensitivity

分类号:

TP212；TN43

DOI:

DOI:10.19950/j.cnki.CN61-1121/TH.2024.02.002

文献标志码:

A

摘要:

由于压阻式MEMS传感器输出信号极其微弱，极易受到测试环境的噪声干扰，还需要外接调理电路，为了提升信号的采集精度，提出一种压阻式传感器信号ASIC调理电路的设计方案，实现输出信号的放大、滤波功能。测试结果表明，调理电路可以在10~200倍的范围内调节增益，-0.5 dB截止频率调节范围覆盖0.1~20 kHz；低频范围内，芯片的等效噪声为45 。将调理电路与传感器相结合，改进的测试系统响应速度快，滤波效果更好，测试精度优于5%，传感器非线性为5.4%。同时，调理电路的大小和体积也很小，功耗低，对后续继续研究传感器测试系统有重要意义。

Abstract:

As the output signal of piezoresistive MEMS sensor is extremely weak, it is easy to be disturbed by the noise of the test environment, and an external conditioning circuit is needed. In order to improve the signal acquisition accuracy, a design scheme of the piezoresistive sensor signal ASIC conditioning circuit is proposed to realize the amplification and filtering functions of the output signal. The test results show that the control circuit can adjust the gain in the range of 10-200 times, and the adjustment range of -0.5 dB cutoff frequency covers 0.1k-20 kHz; In the low frequency range, the equivalent noise of the chip is 45 nV/√Hz. By combining the conditioning circuit with the sensor, the improved test system has fast response speed, better filtering effect, test accuracy is better than 5%, and the sensor nonlinearity is 5.4%. At the same time, the size and volume of the conditioning circuit are also small, and the power consumption is low, which is of great significance for the follow-up research on the sensor test system.

参考文献/References:

[1]王浩.MEMS加速度计传感器专用ASIC简介及设计[J].中国集成电路,2019,28(7):35-40+88.

相似文献/References:

[1]张 栋,胡廷轩,雷建和,等.锁定放大微弱信号检测仿真与设计研究[J].工业仪表与自动化装置,2016,(04):40.
　ZHANG Dong,HU Tingxuan,LEI Jianhe,et al.Study on the simulation and design of weak signal detection based on lock-in amplifier[J].Industrial Instrumentation & Automation,2016,(02):40.
[2]李绍辉,张乐晖,曹媛媛*.一种弦式接收仪频率参量计量校准方法研究[J].工业仪表与自动化装置,2022,(04):70.[doi:10.19950/j.cnki.cn61-1121/th.2022.04.014]
　LI Shaohui,ZHANG Lehui,CAO Yuanyuan.Research on frequency parameter calibration method of vibrating wire readout[J].Industrial Instrumentation & Automation,2022,(02):70.[doi:10.19950/j.cnki.cn61-1121/th.2022.04.014]
[3]董文厚,阮玉华.基于FPGA的LLC谐振变换器设计[J].工业仪表与自动化装置,2022,(05):3.[doi:10.19950/j.cnki.cn61-1121/th.2022.05.001]
　DONG Wenhou,RUAN Yuhua.LLC resonant converter design based on FPGA[J].Industrial Instrumentation & Automation,2022,(02):3.[doi:10.19950/j.cnki.cn61-1121/th.2022.05.001]

备注/Memo

备注/Memo:

收稿日期：2023-11-06项目基金：山西省基础研究计划面上项目(202103021224206)第一作者：李艳（1999—），女，山西临汾人，硕士研究生，主要研究方向为压阻式MEMS加速度传感器信号调理电路设计与优化。

常用功能