|本期目录/Table of Contents|

[1]卿绿军,陈万强,李祥阳,等.基于LabVIEW与PLC的旋涡泵性能参数测控系统设计[J].工业仪表与自动化装置,2017,(04):64-68.
　QING Lüjun,CHEN Wanqiang,LI Xiangyang,et al.Design of performance measurement and control system of vortex pump based on LabVIEW and PLC[J].Industrial Instrumentation & Automation,2017,(04):64-68.
点击复制

基于LabVIEW与PLC的旋涡泵性能参数测控系统设计

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:
期数:
2017年04期
页码:
64-68
栏目:
出版日期:
2017-08-15

文章信息/Info

Title:
Design of performance measurement and control system of vortex pump based on LabVIEW and PLC
文章编号:
1000-0682（2017）04-0000-00
作者:
卿绿军; 陈万强; 李祥阳; 王 玮; 陶佳欣
（西安航空学院 陕西省泵类装备工程研究中心，西安 710077）
Author(s):
QING Lüjun; CHEN Wanqiang;  LI Xiangyang;  WANG Wei;  TAO Jiaxin
(Shaanxi Province Research Center of Pump Equipment Engineering, Xi’an Aeronautical University, Xi’an 710077, China)
关键词:
旋涡泵; PLC; LabVIEW; 性能参数; 测控系统
Keywords:
vortex pump; PLC; LabVIEW; performance parameters; measurement and control system
分类号:
TH314
DOI:
-
文献标志码:
A
摘要:
以旋涡泵性能参数测量为研究对象，完成了其测控平台的设计。在介绍测试系统工作原理及测控平台设计思路的基础上，运用下位机PLC控制系统实现试验过程的控制和数据采集，利用上位机中LabVIEW软件实现相关数据分析、存储和实时显示，再结合OPC技术，实现上位机与下位机间的数据通信，完成了旋涡泵测试系统测控平台的开发。该平台人机界面友好，运行可靠，具有良好的开放性和可扩展性，能更好地满足旋涡泵性能测试的需要。
Abstract:
The measurement and control system for the performance parameters of the vortex pump was researched. Based on introducing the measurement and control system’s structure and working principle of the test bench, the control and data acquisition of the test process was achieved through PLC control system，the data analysis, storage and real-time display was realized by the LABVIEW software in the PC, and the data communication between the upper computer and the lower computer is realized by the OPC technology. The development of the measurement and control platform of the vortex pump testing system was completed. The platform has friendly man-machine interface, reliable operation, good opening and expansibility, and can better meet the needs of the test of the performance of the vortex pump.

参考文献/References:

[1] 权辉,李瑾,李仁年,等.旋涡泵研究现状及存在的问题分析[J].热能动力工程,2016(06):1-7,120.

[2] 武鹏,张菲茜,吴大转,等.非等距叶片微型旋涡泵压力脉动特性研究[J].工程热物理学报,2015(04):775-779.
[3] 李祥阳,陈万强,曹海泉,等.一种新型双支承旋涡泵[J]. 新技术新工艺,2014(01):1-4.
[4] Choi WC,Yoo is, Park M R, et al. Experimental Study on the Effect of Blade Angle on Regenerative Pump Performance[J].Proceedings of the Institution of Mechanical Engineers, Part A:Journal of Power and Energy, 2013,227(5):585-592.
[5] 王洋,李亚成,曹璞钰,等.M型截面流道对旋涡泵性能的影响分析[J].农业机械学报,2014(03):77-82.
[6] Badami M, Mura M.Theoretical model with experimental validation of a regenerative blower for hydrogen recirculation in a PEM fuel cell system[J].Energy Conversion and Management, 2010,51(3):553-560.
[7] Quail F J, Scanlon T, Baumgartner A. Design study of a regenerative pump using one- dimensional and three- dimensional numerical techniques[J].European Journal of Mechanics-B/Fluids,2012,31(1):181-187.
[8] 袁寿其,施卫东,刘厚林,等.泵理论与技术[M].北京:机械工业出版社,2014.
[9] 施卫东,张德胜,郎涛,等.基于LabVIEW的水泵性能测试系统的设计[J].排灌机械,2007(03):38-41.
[10] 张志敏,路敦民,张厚江,等.基于LabVIEW及PLC电机运动控制系统的设计[J].测控技术,2016(01):56-60.?
[11] 张桂香,张志军.PLC的选型与系统配置[J].微计算机信息,2005(09):81-82,36.
[12] 付平,周锐,尹洪涛.LabVIEW与S7-200 PLC自由口通信的实现[J].电子测量技术,2013(06):87-92.?
[13] 于辉,金侠杰,邢科礼,等.基于OPC与LabVIEW的液压泵和液压马达自动测试系统[J].机械制造,2014(08):74-77.
[14] 雷振山,肖成勇,魏丽,等.LabVIEW高级编程与虚拟仪器工程应用[M].北京:中国铁道出版社,2013.

相似文献/References:

[1]卢英俊,孙小方,潘海天,等.基于PLC和iFIX的乙腈变压精馏实验装置控制系统设计[J].工业仪表与自动化装置,2013,(05):28.
[2]莫慧芳,饶明辉,陈瑞,等.PLC变频调速恒压供水技术在某自来水厂中的应用[J].工业仪表与自动化装置,2013,(05):36.
[3]高敬更,陈欣,乔立凤,等.基于PLC的液压成型控制系统的设计[J].工业仪表与自动化装置,2013,(05):39.
[4]金萌时,魏中青,孔祥伟,等.一种用于闪频观察窗的直流步进电机控制系统设计[J].工业仪表与自动化装置,2013,(05):43.
[5]康 权,吕庆春,俞永江,等.基于Quantum PLC和iFix的低温多效海水淡化控制系统[J].工业仪表与自动化装置,2014,(05):17.
　KANG Quan,LV Qingchun,YU Yong-jiang,et al.Control system combining Quantum PLC with iFix for LT- MED[J].Industrial Instrumentation & Automation,2014,(04):17.
[6]汪宏武.基于西门子S7-200的RH精炼炉浸渍管维修台车的自动控制设计[J].工业仪表与自动化装置,2014,(06):47.
　WANG Hongwu.The automatic control design of RH refining furnace dip pipe repair car based on Siemens S7-200[J].Industrial Instrumentation & Automation,2014,(04):47.
[7]何 瑛.基于WinCC组态软件和S7-300 PLC的五效降膜蒸发器自动控制系统的设计[J].工业仪表与自动化装置,2015,(02):64.
　HE Ying.Design of five-effect falling film evaporator automatic control system based on WinCC & S7-300 PLC[J].Industrial Instrumentation & Automation,2015,(04):64.
[8]邹益民.S7-200 PLC与单片机间ModBus主从通信方式[J].工业仪表与自动化装置,2015,(03):19.
　ZOUou Yi-min.Research on master-slave communications between S7-200 PLC with SCM based on ModBus protocol[J].Industrial Instrumentation & Automation,2015,(04):19.
[9]李雪松,谌海云,刘晓露,等.基于Rockwell现场总线的观光缆车控制系统设计[J].工业仪表与自动化装置,2015,(03):33.
　LI Xuesong,CHEN Haiyun,LIU Xiaolu,et al.The design of the gondola control system bansed on Rockwell field bus[J].Industrial Instrumentation & Automation,2015,(04):33.
[10]张利民,邹益民.基于TTS模块的S7-200 PLC语音播报功能扩展[J].工业仪表与自动化装置,2015,(04):34.
　ZHANG Limin,ZOU Yimin.Extend PLC voice broadcast feature based on TTS module[J].Industrial Instrumentation & Automation,2015,(04):34.

备注/Memo

备注/Memo:
收稿日期：2016-12-16
基金项目：国家自然科学基金资助项目（51575420）；西安航空学院校级基金资助项目（2016KY1204）
作者简介：卿绿军（1987），男，陕西西安人，硕士，助教，主要从事液压系统动态测试，状态监测及故障诊断工作。
更新日期/Last Update: 1900-01-01