[1]顾泽堃,陈启东*.喷雾闪蒸过程的数学模型建立[J].工业仪表与自动化装置,2019,(05):16-21.[doi:1000-0682(2019)05-0000-00]
　GU Zekun,CHEN Qidong*.The establish of a mathematical model for spray flash evaporation[J].Industrial Instrumentation & Automation,2019,(05):16-21.[doi:1000-0682(2019)05-0000-00]
点击复制

喷雾闪蒸过程的数学模型建立

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:
期数:
2019年05期
页码:
16-21
栏目:
出版日期:
2019-10-15

文章信息/Info

Title:
The establish of a mathematical model for spray flash evaporation
作者:
顾泽堃1; 陈启东2*
1.苏州大学 机电工程学院，江苏 苏州 215000；
2.常熟理工学院 机械工程学院，江苏 常熟 215500
Author(s):
GU Zekun1;  CHEN Qidong2*
1.School of Mechanics,Soochow University,Jiangsu Suzhou 21500,China;
2.School of Mechanical Engineering,Changshu Institute of Technology,Jiangsu Changshu 215500,China
关键词:
关键词：液滴闪蒸; 数学模型; Simulink
Keywords:
Keywords: flash evaporation;  mathematical model;  Simulink
分类号:
TK124
DOI:
1000-0682(2019)05-0000-00
文献标志码:
A
摘要:
在扩散控制蒸发模型的基础上，运用质量守恒、能量守恒和传热传质等基本定律，建立喷雾闪蒸的数学模型，使用MATLAB/Simulink进行求解，经计算得出闪蒸过程中液滴温度、直径、质量、蒸发速率和蒸发率的变化规律，使用控制变量法，研究了液滴初始温度、闪蒸环境压力、液滴直径对液滴的温度、直径、质量、蒸发速率和蒸发率随着时间的影响，得出了相应的结论。
Abstract:
Based on the diffusion control evaporation model, the basic laws of mass conservation, energy conservation and heat and mass transfer are used to establish a mathematical model of spray flashing.The solution is solved by MATLAB/Simulink,and the liquid in the flashing process is calculated.The influence of initial temperature,evaporation pressure and droplet diameter on the droplet’s temperature evolution,evaporation rate,flash efficiency and flash duration time was investigated and representative conclusion were made.

参考文献/References:

[1] Cheng W L, Chen H, Hu L, et al. Effect of droplet flash evaporation on vacuum flash evaporation cooling: Modeling[J]. International Journal of Heat and Mass Transfer, 2015, 84: 149-157.?

[2] Wang C,Xu R N,Song Y. Study on water droplet flash evaporation in vacuum spray cooling[J]. International Journal of Heat and Mass Transfer, 2017, 112: 279-288.
[3] Cai B N,Tuo X B,Song Z C. Modeling of spray flash evaporation based on droplet analysis[J]. Applied Thermal Engineering, 2018, 130: 1044-1051.
[4] Shin H T, Lee Y P, Jurng J, et al. Spherical-shaped ice particle production by spraying water in a vacuum chamber[J].Applied Thermal Engineering,2000,20(5): 439-454.?
[5] 高文忠,时亚茹,曹丹,等.氯化锂溶液液滴真空闪蒸过程温度分布特性研究[J].真空科学与技术学报,2014,34(3): 197-203.
[6] Muthunayagam A E, Ramamurthi K, Paden J R, et al. Modelling and experiments on vaporization of saline water at low temperatures and reduced pressures[J]. Applied Thermal Engineering, 2005, 25(5): 941-952.
[7] 苏凌宇. 负压环境下燃料液滴蒸发过程的试验和理论研究[D]. 国防科学技术大学, 2004.
[8] 赵子竞.加湿除湿海水淡化喷雾过程仿真与实验研究[D].天津:中国民航大学,2015.
[9] 李志伟. 喷雾蒸发海水淡化的数值模拟[D].天津:中国民航大学,2014.
[10] 陈磊. 介观喷雾蒸发分离高浓度盐水处理系统的构建及性能研究[D].天津:天津大学,2015.

相似文献/References:

[1]陈 伟,王小龙,张浩琛.电压跌落时双馈电机电磁暂态过程仿真与分析[J].工业仪表与自动化装置,2014,(05):10.
　CHEN Wei,WANG Xiaolong,ZHANG Haochen.Simulation and analysis of doubly-fed induction generator transient response during voltage dip[J].Industrial Instrumentation & Automation,2014,(05):10.
[2]陈倩萍,汪建文,贺海霞,等.基于Matlab/Simulink奶站热泵系统的设计与实现[J].工业仪表与自动化装置,2015,(02):87.
　CHEN Qianping,WANG Jianwen,HE Haixia,et al.Design and realization of heat pump system at milk station based on Matlab/Simulink[J].Industrial Instrumentation & Automation,2015,(05):87.
[3]李普良,刘泽晖,黄梦微.多参数科氏力谐振传感器测量数学模型分析[J].工业仪表与自动化装置,2019,(03):95.[doi:1000-0682(2019)03-0000-00]
　LI Puliang,LIU Zehui,HUANG Mengwei.Analysis of the mathematical model of multi-parameter Coriolis force resonance transducer measurement[J].Industrial Instrumentation & Automation,2019,(05):95.[doi:1000-0682(2019)03-0000-00]
[4]刘安成,刘喜梅.基于Matlab/GUI的太阳辐射资源的仿真模型[J].工业仪表与自动化装置,2021,(05):56.[doi:10.19950/j.cnki.cn61-1121/th.2021.05.013]
　LIU Ancheng,LIU Ximei.Simulation model of solar radiation resources based on Matlab/GUI[J].Industrial Instrumentation & Automation,2021,(05):56.[doi:10.19950/j.cnki.cn61-1121/th.2021.05.013]
[5]苏 杨,余 萱,卢 翔,等.基于BP神经网络PID机房温度控制研究[J].工业仪表与自动化装置,2022,(02):102.[doi:10.19950/j.cnki.cn61-1121/th.2022.02.021]
　SU Yang,YU Xuan,LU xiang,et al.Research on temperature control of PID computer room based on BP neural network[J].Industrial Instrumentation & Automation,2022,(05):102.[doi:10.19950/j.cnki.cn61-1121/th.2022.02.021]
[6]王明吉,沈 强,刘彦昌,等.基于铂电阻传感器的动态特性试验研究[J].工业仪表与自动化装置,2023,(02):41.[doi:10.19950/j.cnki.cn61-1121/th.2023.02.008]
　WANG Mingji,SHEN Qiang,LIU Yanchang,et al.Experimental study on dynamic characteristics based on platinum resistance sensor[J].Industrial Instrumentation & Automation,2023,(05):41.[doi:10.19950/j.cnki.cn61-1121/th.2023.02.008]
[7]周文辉,冯鑫.流出系数和可膨胀性系数对差压式流量计计量影响的分析与研究[J].工业仪表与自动化装置,2025,(02):117.[doi:10.19950/j.cnki.CN61-1121/TH.2025.02.021]
　ZHOU Wenhui,FENG Xin.Analysis and study on the effects of outflow coefficient and scalability coefficient on differential pressure flow meter measurement[J].Industrial Instrumentation & Automation,2025,(05):117.[doi:10.19950/j.cnki.CN61-1121/TH.2025.02.021]

备注/Memo

备注/Memo:
收稿日期：2019-02-02
基金项目：国家自然科学基金（51705037）
作者简介：顾泽堃(1993)，硕士研究生，主要研究喷雾闪蒸。通信作者：陈启东, 江苏无锡人,教授,研究方向为机械振动和流体力学。
更新日期/Last Update: 1900-01-01