|本期目录/Table of Contents|

[1]强明辉,谭圣军,章国红.基于LabVIEW的减速机加载控制系统研究[J].工业仪表与自动化装置,2020,(06):61-64+68.[doi:1000-0682(2020)06-0000-00]
　QIANG Minghui,TAN Shengjun,ZHANG Guohong.Resrarch on loading control system of reducer based on LabVIEW[J].Industrial Instrumentation & Automation,2020,(06):61-64+68.[doi:1000-0682(2020)06-0000-00]
点击复制

基于LabVIEW的减速机加载控制系统研究

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:
期数:
2020年06期
页码:
61-64+68
栏目:
出版日期:
2020-12-15

文章信息/Info

Title:
Resrarch on loading control system of reducer based on LabVIEW
作者:
强明辉; 谭圣军; 章国红
1.兰州理工大学 电气工程与信息工程学院；
2.甘肃省工业过程先进控制重点实验室，甘肃 兰州 730050
Author(s):
QIANG Minghui1; 2;  TAN Shengjun1;  ZHANG Guohong1
1. College of Electrical and Information Engineering, Lanzhou University of Technology；
2. Key Laboratory of Gansu Advanced Control for Industrial Processes,Gansu Lanzhou 730050, China
关键词:
减速机; LabVIEW; 加载; 性能试验
Keywords:
reducer;  LabVIEW;  loading;  performance test
分类号:
TP273
DOI:
1000-0682(2020)06-0000-00
文献标志码:
A
摘要:
为了管控企业生产减速机的质量,需要对减速机性能进行出厂试验。针对减速机实验方法要求,需要在减速机加载过程中对转速、转矩及温升进行测试。该文利用2组转矩-转速传感器、磁粉加载器、程控加载电源模块及4个PT100温度传感器(测量减速机外壳、油温及室内温度),借助LabVIEW平台,开发了基于LabVIEW的减速机加载控制系统,控制加载过程,采集处理转速、转矩和温升的测量数据,判断减速机性能质量,并输出测试结果报表供生产部门参考。现场使用表明,该系统满足减速机性能试验要求。
Abstract:
In order to control the quality of the reducer, it is necessary to carry out the factory test of the performance of the reducer.To meet the requirements of the speed reducer experimental method, the speed, torque and temperature rise need to be tested during the load of the speed reducer.Two sets of torque-speed sensors,magnetic powder loaders,program-controlled load power modules and four PT100 temperature sensors (measure the temprature of reducer case,oil and indoor),using the LabVIEW platform,developed a LabVIEW-based reducer loading control system to control the loading process, collect and process measurement data of speed,torque and temperature rise,and judge the performance quality of the reducer, And output the test result report for reference of the production department. Practical application proves that the loading control system meets the requirements of the performance test of the reducer.

参考文献/References:

[1] 乔羽,曹瑞峰,曲彩梅,等.浅谈减速器的类型及其特性[J].福建质量管理,2017(18):119.

[2] 魏兵,杨文堤.机械设计基础[M].武汉:华中科技大学出版社,2011.
[3] 王莹,李华晋,刘鸣.基于LabVIEW的测控电路实验教学仿真[J].实验室科学,2010,13(03):116-118.
[4] 朱家诚,陶飞,蒋正龙.电封闭技术在行星减速器试验台研制中的应用[J].机械设计与制造,2014(01):115-117.
[5] 程鹤鸣.大速比混合轮系减速器试验台的研究[D].武汉:武汉理工大学,2011.
[6] 刘文浩,项小东,李志远.基于CAN总线的汽车仪表设计[J].信息通信,2017(07):61-62.
[7] 杨铮,周祥才.基于LabVIEW的热敏电阻线性化处理[J].自动化技术与应用,2006(07):77-79.
[8] 中华人民共和国工业和信息化部.减(增)速器试验方法:JB/T 5558—2015 [S]北京：机械工业出版社，2016:1.

相似文献/References:

[1]王树东,孙 野,梁国栋,等.基于LabVIEW的高速数据采集系统设计[J].工业仪表与自动化装置,2014,(04):32.
　WANG Shudong,SUN Ye,LIANG Guodong,et al.Design of the high-speed data acquisition system based on LabVIEW[J].Industrial Instrumentation & Automation,2014,(06):32.
[2]王树东,何 明.关于LabVIEW采集系统的数据存储[J].工业仪表与自动化装置,2014,(05):95.
　WANG Shudong,HE Ming.Acquisition system stored on LabVIEW[J].Industrial Instrumentation & Automation,2014,(06):95.
[3]刘荣荣.基于LabVIEW的自动锯床位置控制系统的设计[J].工业仪表与自动化装置,2014,(06):34.
　LIU Rongrong.The design on the controlled position system of automatic saw on LabVIEW[J].Industrial Instrumentation & Automation,2014,(06):34.
[4]孟文俊a,徐光华a,b,等.基于LabVIEW的滚动轴承非平稳过程监测诊断及性能评估系统的开发[J].工业仪表与自动化装置,2015,(02):18.
　MENG Wenjuna,XU Guanghuaa,b,et al.Development of non-stationary process for rolling bearing fault diagnosis and performance evaluation system based on LabVIEW[J].Industrial Instrumentation & Automation,2015,(06):18.
[5]梁 琛,贾远温,王晓兰.基于LabVIEW的输电线路工频参数测量系统设计[J].工业仪表与自动化装置,2015,(02):26.
　LIANG Chen,JIA Yuanwen,WANG Xiaolan.The design on measure system for transmission lines power frequency parameters based on LabVIEW[J].Industrial Instrumentation & Automation,2015,(06):26.
[6]赵媛媛,陈 捡,王晓侃.基于虚拟仪器的温度检测系统设计[J].工业仪表与自动化装置,2015,(04):38.
　ZHAO Yuanyuan,CHEN Jian,WANG Xiaokan.Design of temperature detection, system based on virtual instruments[J].Industrial Instrumentation & Automation,2015,(06):38.
[7]白 璘,惠 萌,武奇生.城市轨道交通ATP仿真实验装置设计与开发[J].工业仪表与自动化装置,2015,(04):68.
　BAI Lin,HUI Meng,WU Qisheng.Design and development of urban railway ATP stimulation experiment device[J].Industrial Instrumentation & Automation,2015,(06):68.
[8]牟玉喆,潘 鑫,高金吉*,等.基于LabVIEW的不平衡振动信号相位实时提取方法研究[J].工业仪表与自动化装置,2015,(05):17.
　MOU Yuzhe,PAN Xin,GAO Jinji,et al.Research on the phase real-time extraction methods for imbalance vbration signa based on the Labview platform[J].Industrial Instrumentation & Automation,2015,(06):17.
[9]孙茂元,王新兵,左都罗,等.基于LabVIEW的液滴喷射图像采集和分析系统[J].工业仪表与自动化装置,2015,(05):25.
　Sun Maoyuan,Wang Xinbing,Zuo duluo,et al.Liquid droplet jetting image acquisition and analysis system based on Labview[J].Industrial Instrumentation & Automation,2015,(06):25.
[10]刘荣荣.基于LabVIEW的散热器性能测试系统的设计[J].工业仪表与自动化装置,2016,(01):53.
　LIU Rongrong.The design of radiator performance testing system based on LabVIEW[J].Industrial Instrumentation & Automation,2016,(06):53.

备注/Memo

备注/Memo:
收稿日期：2020-03-17
作者简介：
强明辉(1960)，男，陕西省扶风市人，教授级高级工程师，主要从事过程控制、检测技术等工作。
通信作者：
谭圣军(1991)，男，安徽省安庆市人，研究方向为数控技术、通信技术等。
更新日期/Last Update: 1900-01-01