[1]陶小利,高 嵩,黄宏伟,等.高温工况下热工参数测量的系统解决方案的研究[J].工业仪表与自动化装置,2022,(01):121-122+126.[doi:10.19950/j.cnki.cn61-1121/th.2022.01.025]
　TAO Xiaoli,GAO Song,HUANG Hongwei,et al.Study on the system solution of thermal parameters under high temperature conditions[J].Industrial Instrumentation & Automation,2022,(01):121-122+126.[doi:10.19950/j.cnki.cn61-1121/th.2022.01.025]
点击复制

高温工况下热工参数测量的系统解决方案的研究

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:
期数:
2022年01期
页码:
121-122+126
栏目:
出版日期:
2022-02-15

文章信息/Info

Title:
Study on the system solution of thermal parameters under high temperature conditions
文章编号:
1000-0682（2022）01-0000-00
作者:
陶小利; 高 嵩; 黄宏伟; 朱 敏
西仪股份有限公司，陕西 西安 710082
Author(s):
TAO Xiaoli; GAO Song; HUANG Hongwei; ZHU Min
(XIYI GROUP CO.,LTD.,Shaanxi Xi’an 710082,China)
关键词:
热工参数; 测量
Keywords:
thermal parameters;  measurement
分类号:
TB2
DOI:
10.19950/j.cnki.cn61-1121/th.2022.01.025
文献标志码:
B
摘要:
热参数测量的巨大需求是为了准确测量温度监测参数，以提高电力设备的安全性和效率，确保设备的安全运行。然而，在电力生产本身，由于各种原因，热参数测量不正确可能会不时发生，这会导致热保护系统发生故障或停止。该文总结分析了设备运行过程中常见的测温问题，提出了维护和操作解决方案。
Abstract:
The main requirements of the thermal parameter measurement are to accurately measure the thermal monitoring parameters, so as to improve the safety and efficiency of the device and equipment, and to ensure the safe operation of the device. However, in actual power generation, inaccurate measurements of the thermal parameters will occasionally occur due to various reasons, which leads to a failure or stop of the thermal protection system. This paper summarizes and analyzes the common temperature measurement problems in the equipment operation, and proposes the solutions for maintenance and operation. To improve the reliability of thermal automation system, the first thing is to ensure the accuracy of thermal measurement signal. Increasing power of device, change of device characteristics and extensive application of DCS technology make thermal automation Preparation has become the key factor in the safe and economic operation of the device. Communication problems may cause heat control errors. Some machine functions or system failures or damaged basic equipment.

参考文献/References:

[1]乐鹰,康瑞庭.火电厂热工参数软测量技术研究[J].中国设备工程,2018(23):82-83.

[2]薛辉,陆晔.火电厂热工参数软测量技术的应用价值分析[J].科学技术创新,2019(26):20-21.
[3]官长杰.浅谈热工测量中常见的问题与解决途径[J].高科技与产业化,2019(06):76-77.
[4]罗嘉,陈世和,张曦,等.电站锅炉典型热工参数软测量研究[J].中国电力,2018,49(06):48-52.
[5]王学斌,赵钦新,惠世恩,等.纯低温余热发电系统热工参数的设计优化[J].锅炉技术,2018(06):1-4+21.
[6]马元镐,张宗杰,邹文康,等.柴油机进排气系统热工参数测量和数据处理系统[J].舰船科学技术,2017(04):15-19.
[7]张海永.基于图像深度学习的电力计量设备故障监测方法[J].电子设计工程,2021,29(9):103-106.
[8]杨 玺,区永健,庞皓元,赵炳辉.基于深度学习的电力计量检定流水线故障预警技术[J].电子设计工程,2020,(04):153-157.

相似文献/References:

[1]樊华.锅炉汽包水位的测量及差压开关的应用[J].工业仪表与自动化装置,2013,(05):103.
[2]张胜利.浅谈企业计量管理的创新[J].工业仪表与自动化装置,2014,(05):98.
　ZHANG Shengli.The introduction of enterprise’s metrological management innovation[J].Industrial Instrumentation & Automation,2014,(01):98.
[3]赵 帅,李醒飞,谭文斌.基于PMAC的气缸套内径测量系统设计[J].工业仪表与自动化装置,2021,(03):16.[doi:10.19950/j.cnki.cn61-1121/th.2021.03.003]
　ZHAO Shuai,LI Xingfei,TAN Wenbin.Design of cylinder liner inner diameter measurement system based on PMAC[J].Industrial Instrumentation & Automation,2021,(01):16.[doi:10.19950/j.cnki.cn61-1121/th.2021.03.003]
[4]祁建德,贾永辉,韦宝侣,等.一种新型车轮三分力传感器的台架试验验证[J].工业仪表与自动化装置,2021,(04):14.[doi:10.19950/j.cnki.cn61-1121/th.2021.04.003]
　QI Jiande,JIA Yonghui,WEI Baolv,et al.Bench test verification of a new wheel three-component force sensor[J].Industrial Instrumentation & Automation,2021,(01):14.[doi:10.19950/j.cnki.cn61-1121/th.2021.04.003]
[5]陈卫红,邓晓刚,陈鸿龙.基于小型测力装置的测控系统设计与应用[J].工业仪表与自动化装置,2021,(05):46.[doi:10.19950/j.cnki.cn61-1121/th.2021.05.011]
　CHEN Weihong,DENG Xiaogang,CHEN Honglong.Design and application of measurement and control system based on small force measuring device[J].Industrial Instrumentation & Automation,2021,(01):46.[doi:10.19950/j.cnki.cn61-1121/th.2021.05.011]
[6]曹红星,李梦仁,毛旦平.基于触摸屏与PLC的舱段装配测量平台控制系统设计[J].工业仪表与自动化装置,2023,(06):26.[doi:DOI:10.19950/j.cnki.cn61-1121/th.2023.06.004]
　CAO hongxing,LI Mengren,MAO danping.Control system design of cabin assembly measurement platform based on touch screen and PLC[J].Industrial Instrumentation & Automation,2023,(01):26.[doi:DOI:10.19950/j.cnki.cn61-1121/th.2023.06.004]
[7]刘 磊.一种新型低下限差压流速传感器的设计及应用[J].工业仪表与自动化装置,2023,(06):60.[doi:DOI:10.19950/j.cnki.cn61-1121/th.2023.06.010]
　LIU Lei.Design and application of a new low lower differential pressure flow sensor[J].Industrial Instrumentation & Automation,2023,(01):60.[doi:DOI:10.19950/j.cnki.cn61-1121/th.2023.06.010]

备注/Memo

备注/Memo:
收稿日期：2021-07-07

作者简介：
陶小利（1976），本科，主要从事变送器及热工仪表的工艺研究。
更新日期/Last Update: 1900-01-01