[1]孟文俊a,徐光华a,b,等.基于LabVIEW的滚动轴承非平稳过程监测诊断及性能评估系统的开发[J].工业仪表与自动化装置,2015,(02):18-22.
　MENG Wenjuna,XU Guanghuaa,b,et al.Development of non-stationary process for rolling bearing fault diagnosis and performance evaluation system based on LabVIEW[J].Industrial Instrumentation & Automation,2015,(02):18-22.
点击复制

基于LabVIEW的滚动轴承非平稳过程监测诊断及性能评估系统的开发()

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:
期数:
2015年02期
页码:
18-22
栏目:
出版日期:
2015-04-15

文章信息/Info

Title:
Development of non-stationary process for rolling bearing fault diagnosis and performance evaluation system based on LabVIEW
作者:
孟文俊a; 徐光华a; b; 姜阔胜a; 王 义a; 陈晓光a; 陶唐飞a; b
（西安交通大学 a. 机械工程学院；b. 机械制造系统工程国家重点实验室，西安 710049）
Author(s):
MENG Wenjuna; XU Guanghuaa; b;  JIANG Kuoshenga; WANG Yia; CHEN Xiaoguanga; TAO Tangfeia; b
（a.School of Mechanical Engineering；b.State Key Laboratory for Manufacturing Systems Engineering, Xi’an Jiaotong University, Xi’an 710049 ,China）
关键词:
LabVIEW; 滚动轴承非平稳过程; 数据采集; 故障诊断; 性能评估
Keywords:
LabVIEW;  non-stationary processes for rolling bearing;  data collection;  fault diagnosis;  performance evaluation
分类号:
-
DOI:
-
文献标志码:
A
摘要:
以LabVIEW软件为开发平台，建立滚动轴承非平稳过程故障诊断及性能评估系统，完成系统硬件和软件的设计。系统采用NI9234数据采集卡，针对变工况下滚动轴承振动和瞬时角速度信号进行采集和分析。该系统集成了多通道数据采集、试验台控制、数据库存储以及基于该文研究算法的测试分析等模块。
Abstract:
Based on LabVIEW software development platform,a non-stationary process for rolling bearing fault diagnosis and performance evaluation system is established,and the hardware and software of this system are designed.The system uses NI9234 data acquisition card,collecting and analysing vibration and instantaneous angular velocity signal on the variable conditions of rolling bearing.This system integrates multi-channels data acquisition,test stand control,database storage and analysis based on this paper algorithms.

参考文献/References:

[1] 刘晓东,吴斌,冯长建.变速非平稳条件下滚动轴承故障特征提取方法研究[J].现代制造工程,2007(8):4-9.

[2] 张洁,高品贤,林建辉.变速旋转机械的锁相倍频测试技术[J].中国测试技术,2003,9(5):13-14.
[3] 宋京伟,梅秀庄,郭云.变转速变载荷下滚动轴承故障的小波-HMM诊断[J].轴承,2005(12):9-12.
[4] 秘晓元.LabVIEW中利用LabSQL对数据库访问技术的探讨[J].自动化与仪器仪表,2004,116(6):54-56.
[5] 沈保山,姬长英,郭玉平,等.基于LabVIEW数据采集系统的设计[J].机械与电子,2009(4):76-78.
[6] 栗佳,包瑞新.基于LabVIEW的旋转机械故障诊断系统的研究与开发[J].噪声与振动控制,2008,28(2):47-50.
[7] 梅宏斌.机械学.滚动轴承振动监测与诊断：理论?方法? 系统[M].北京:机械工业出版社,1995.[8] 陈树学,刘萱.LabVIEW宝典[M].北京:电子工业出版社, 2011.

相似文献/References:

[1]王树东,孙 野,梁国栋,等.基于LabVIEW的高速数据采集系统设计[J].工业仪表与自动化装置,2014,(04):32.
　WANG Shudong,SUN Ye,LIANG Guodong,et al.Design of the high-speed data acquisition system based on LabVIEW[J].Industrial Instrumentation & Automation,2014,(02):32.
[2]王树东,何 明.关于LabVIEW采集系统的数据存储[J].工业仪表与自动化装置,2014,(05):95.
　WANG Shudong,HE Ming.Acquisition system stored on LabVIEW[J].Industrial Instrumentation & Automation,2014,(02):95.
[3]刘荣荣.基于LabVIEW的自动锯床位置控制系统的设计[J].工业仪表与自动化装置,2014,(06):34.
　LIU Rongrong.The design on the controlled position system of automatic saw on LabVIEW[J].Industrial Instrumentation & Automation,2014,(02):34.
[4]梁 琛,贾远温,王晓兰.基于LabVIEW的输电线路工频参数测量系统设计[J].工业仪表与自动化装置,2015,(02):26.
　LIANG Chen,JIA Yuanwen,WANG Xiaolan.The design on measure system for transmission lines power frequency parameters based on LabVIEW[J].Industrial Instrumentation & Automation,2015,(02):26.
[5]赵媛媛,陈 捡,王晓侃.基于虚拟仪器的温度检测系统设计[J].工业仪表与自动化装置,2015,(04):38.
　ZHAO Yuanyuan,CHEN Jian,WANG Xiaokan.Design of temperature detection, system based on virtual instruments[J].Industrial Instrumentation & Automation,2015,(02):38.
[6]白 璘,惠 萌,武奇生.城市轨道交通ATP仿真实验装置设计与开发[J].工业仪表与自动化装置,2015,(04):68.
　BAI Lin,HUI Meng,WU Qisheng.Design and development of urban railway ATP stimulation experiment device[J].Industrial Instrumentation & Automation,2015,(02):68.
[7]牟玉喆,潘 鑫,高金吉*,等.基于LabVIEW的不平衡振动信号相位实时提取方法研究[J].工业仪表与自动化装置,2015,(05):17.
　MOU Yuzhe,PAN Xin,GAO Jinji,et al.Research on the phase real-time extraction methods for imbalance vbration signa based on the Labview platform[J].Industrial Instrumentation & Automation,2015,(02):17.
[8]孙茂元,王新兵,左都罗,等.基于LabVIEW的液滴喷射图像采集和分析系统[J].工业仪表与自动化装置,2015,(05):25.
　Sun Maoyuan,Wang Xinbing,Zuo duluo,et al.Liquid droplet jetting image acquisition and analysis system based on Labview[J].Industrial Instrumentation & Automation,2015,(02):25.
[9]刘荣荣.基于LabVIEW的散热器性能测试系统的设计[J].工业仪表与自动化装置,2016,(01):53.
　LIU Rongrong.The design of radiator performance testing system based on LabVIEW[J].Industrial Instrumentation & Automation,2016,(02):53.
[10]许江淳,石 河,李 瑞,等.基于LabVIEW平台的光电互感器校验仪设计[J].工业仪表与自动化装置,2016,(03):118.
　XU Jiang-chun,SHI He,LI Rui,et al.Design of a Photoelectric Transformer Verification Based on LabVIEW[J].Industrial Instrumentation & Automation,2016,(02):118.

备注/Memo

备注/Memo:

收稿日期 ： 2014-11-07

基金项目 ：“基于自供能无线传感器的航空发动机滚动轴承监测技术”项目（ 51075323)

尀者简介 ：孟文俊，西安交通大学硕士研究生，研究方向为滚动轴承故障诊断技术。
更新日期/Last Update: 1900-01-01