[1]杨 智,段鹏斌.一种基于模糊控制的温度控制器设计[J].工业仪表与自动化装置,2015,(03):90-93.
　YANG Zhi,DUAN Pengbin.A temperature controller design based on fuzzy control[J].Industrial Instrumentation & Automation,2015,(03):90-93.
点击复制

一种基于模糊控制的温度控制器设计()

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:
期数:
2015年03期
页码:
90-93
栏目:
出版日期:
2015-06-15

文章信息/Info

Title:
A temperature controller design based on fuzzy control
文章编号:
1000-0682(2015)03-0000-00
作者:
杨 智; 段鹏斌
（中山大学 信息科学与技术学院，广州 510006）
Author(s):
YANG Zhi;  DUAN Pengbin
( School of Information Science and Technology, Sun Yat-sen University，Guangzhou 510006，China )
关键词:
模糊控制; 自调整; 温度控制; 高精度
Keywords:
fuzzy control;  self-regulatory;  temperature control;  high accuracy
分类号:
TP13
DOI:
-
文献标志码:
A
摘要:
为了提高试验箱的温度控制系统性能，设计了带有自调整因子的模糊控制器，该控制器在常规模糊控制的基础上增加了自调整因子和积分项，利用误差和误差的变化量实时修正控制参数，提高了控制精度。实验表明，该控制算法不仅能够克服试验箱加热系统的大延时、大惯性和非线性等问题，而且能够满足调节时间短，超调量小于5%以及稳态误差在0.1 ℃内的控制要求。
Abstract:
In this paper, a self-adjusting fuzzy logic controller (FLC) is proposed to improve the performance of temperature control system of test chamber. The controller adds a self-regulatory factor and an integral term on the foundation of the conventional fuzzy logic control, uses the error and the error change to adjust control parameters in real-time and enhance the control precise. The simulation experiments show that the new control method can not only overcome large lag features, great inertia and nonlinear of the heating system, but also satisfy short setting time, overshoot within 5% and steady error control within 0.1 ℃ requirements of test chamber.

参考文献/References:

[1] Jiang W, Li J L, Zhang J. Research on the temperature control system based on the Pan-Boolean algebra PID controller[J].Advanced Materials Research, 2011 (230-232):1402-1406.
[2] Zhang R D, Wu S, Lu R Q, Gao F R. Predictive control optimization based PID control for temperature in an industrial surfactant reactor[J]. Chemometrics and Intelligent Laboratory Systems, 2014,15(135): 48-62.
[3] 黎惠成,曾碧,吴清泉,等.一种基于模糊控制的温度控制系统设计[J].计算机技术与发展,2009,19(12): 236-239.
[4] Li Y G, Hu Z H. Optimal design of self-tuning fuzzy controller based on immune principle[C]//Hangzhou,P.R. China: IEEE, Proceedings of the 5th World Congress on Intelligent Control and Automation, 2004: 2593-2597.
[5] Chen Y W, Chai T Y. Temperature control of regenerative heating furnace based on double-crossing clipping PID- RBR[J].Journal of Northeastern University, 2010, 31(9): 1212-1220.
[6] Shi D Q, Gao G L, Gao Z W, et al. Application of expert fuzzy PID method for temperature control of heating furnace[J].Procedia Engineering, 2012(29): 257-261.
[7] Radakovic Z R, Milosevic V M, Radakovic S B. Application of temperature fuzzy controller in an indirect resistance furnace[J].Applied Energy,2002,2(73):167- 182.
[8] 杨智,陈新军.一种PID自整定温度控制器及实现[J].化工自动化及仪表,2000,27(1):59-61.
[9] 陶文华.模糊控制系统研究与应用[J].工业仪表与自动化装置,2004(4):10-12.
[10] He Y B, Lim G H, Chua P S K. Comparison and application of three integral-improved methods on conventional fuzzy control strategy[J].Engineering Applications of Artificial Intelligence, 2003,16(7-8): 723-726.

相似文献/References:

[1]王晓侃,上官建林,朱振伟.基于PIC16F877单片机的加热炉模糊控制系统设计与研究[J].工业仪表与自动化装置,2015,(03):59.
　WANG Xiaokan,SHUANGGUAN Jianlin,ZHU Zhenwei.Design and research of heating furnace fuzzy control system based on PIC16F877 MCU[J].Industrial Instrumentation & Automation,2015,(03):59.
[2]牛宏侠a,侯 涛b.基于超声波传感器的液位控制实验研究[J].工业仪表与自动化装置,2016,(04):71.
　NIU Hongxiaa,HOU Taob.Experiment study of liquid level control based on ultrasonic sensor[J].Industrial Instrumentation & Automation,2016,(03):71.
[3]张 霞.基于嵌入式的装载机自动变速系统研究[J].工业仪表与自动化装置,2016,(04):78.
　ZHANG Xia.Research of loader automatic transmission system based on embedded[J].Industrial Instrumentation & Automation,2016,(03):78.
[4]李丙才a,万强a,赵国勇a,等.电液执行机构的自适应模糊PID控制方法研究[J].工业仪表与自动化装置,2016,(05):121.
　LI Bingcaia,WAN Qianga,ZHAO Guoyonga,et al.Research on fuzzy self-adaptive PID control method for electro-hydraulic actuator[J].Industrial Instrumentation & Automation,2016,(03):121.
[5]党存禄,杜小波.粒子群优化变论域模糊PID控制在风电机组变桨距中的应用[J].工业仪表与自动化装置,2017,(05):97.
　DANG Cunlu,DU Xiaobo.Application of variable universe fuzzy PID control optimized by particle swarm in variable pitch of wind turbine[J].Industrial Instrumentation & Automation,2017,(03):97.
[6]张 弛,吴明亮,吴明永.基于PLC的移动式抹灰砂浆搅拌站控制系统设计[J].工业仪表与自动化装置,2017,(06):33.[doi:1000-0682（2017）06-0033-04]
　ZHANG Chi,WU Mingliang,WU Mingyong.Design of control system of mobile plastering mortar mixing station based on PLC[J].Industrial Instrumentation & Automation,2017,(03):33.[doi:1000-0682（2017）06-0033-04]
[7]刘洪玮.遗传算法在模糊PID交流电机矢量控制系统中的应用[J].工业仪表与自动化装置,2018,(01):120.[doi:1000-0682（2018）01-0000-00]
　LIU Hongwei.Application of algorithm genetic in fuzzy PID vector control system of AC motor[J].Industrial Instrumentation & Automation,2018,(03):120.[doi:1000-0682（2018）01-0000-00]
[8]石书培,褚建新*,周贤文.基于神经网络补偿的温湿度试验箱模糊解耦控制[J].工业仪表与自动化装置,2018,(05):67.[doi:1000-0682（2018）05-0000-00]
　SHI Shupei,CHU Jianxin*,ZHOU Xianwen.Fuzzy decoupling control of temperature and humidity chamber based on neural network compensation[J].Industrial Instrumentation & Automation,2018,(03):67.[doi:1000-0682（2018）05-0000-00]
[9]郝 佳,刘 军,李景彬.基于PLC的换热站自动控制系统研制[J].工业仪表与自动化装置,2018,(05):85.[doi:1000-0682（2018）05-0000-00]
　HAO Jia,LIU Jun,LI Jingbin.The development of heat exchange station automatic control system based on PLC[J].Industrial Instrumentation & Automation,2018,(03):85.[doi:1000-0682（2018）05-0000-00]
[10]张万军,张 峰,张景轩,等.无刷直流电机系统参考模型模糊控制的研究[J].工业仪表与自动化装置,2018,(05):130.[doi:1000-0682（2018）05-0000-00]
　ZHANG Wanjun,ZHANG Feng,ZHANG Jingxuan,et al.Research on fuzzy control of reference model of brushless DC motor system[J].Industrial Instrumentation & Automation,2018,(03):130.[doi:1000-0682（2018）05-0000-00]

备注/Memo

备注/Memo:
-
更新日期/Last Update: 1900-01-01