[1]刘大千,刘振杰.MODBUS/TCP数据采集接口模块的设计[J].工业仪表与自动化装置,2015,(06):32.
　LIU Daqian,LIU Zhenjie.Design of MODBUS/TCP data acquisition interface module[J].Industrial Instrumentation & Automation,2015,(06):32.
点击复制

MODBUS/TCP数据采集接口模块的设计()

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:
期数:
2015年06期
页码:
32
栏目:
出版日期:
2015-12-15

文章信息/Info

Title:
Design of MODBUS/TCP data acquisition interface module
文章编号:
1000-0682(2015)06-0000-00
作者:
刘大千; 刘振杰
（北方工业大学 现场总线技术及自动化北京市重点实验室，北京100041）
Author(s):
LIU Daqian;  LIU Zhenjie
(North China University of Technology-Beijing key laboratory of field bus technology and automation, Beijing 100041, China)
关键词:
MODBUS/TCP; 数据采集; 监控软件; LWIP; μC/OS-II; LPC1788
Keywords:
MODBUS/TCP;  data acquisition;  monitoring software;  LWIP;  μC/OS-II;  LPC1788
分类号:
TP334.7
DOI:
-
文献标志码:
A
摘要:
为适应综合自动化系统向网络化、集中化、智能化的发展趋势，同时也为了简化工业现场复杂的网络布线，设计了一种基于MODBUS/TCP的数据采集接口模块。硬件上采用了功能强大的LPC1788作为主芯片，软件上采用μC/OS-II实时操作系统、LWIP轻型协议栈和MODBUS协议相结合的方法，最终实现数据的集中管理和控制。最后在搭建的应用系统中验证了设计的可行性，实验证明该模块能够实时地将数据上传至控制器，并且传输过程较为稳定、数据正确无误。
Abstract:
In order to adapt to the development tendency of the network and centralized and intelligent, and at the same time to simplify the complicated network cabling of industry field, a data acquisition interface module based on MODBUS/TCP is designed. The hardware uses powerful LPC1788 as main chip and the software uses the method of combing μC/OS-II、LWIP lightweight protocol stack and MODBUS protocol together ,and finally realizes the?centralized management and control?of data. Finally the feasibility of the design was proved in the test system. Experiment shows that data can be real-time uploaded to the controller, and the transmission process is stable.

参考文献/References:

[1] GB/T 19582.3—2008 Modbus协议在TCP/IP上的实现指南[S].

[2] 陈德磊,付新安,任树茂.基于MODBUS/TCP协议的煤气混合站实时监控系统[J].科技风,2013(18):9.
[3] 李洁,梁国玲,马学军. MODBUS通信协议解析[J].青海电力,2013,32(2):57-59.
[4] 王可鹏.基于MODBUS TCP/IP通信的实现[J].电脑知识与技术,2008,4(3):553-554.
[5] 王琼玫,翁慧辉.一种基于Modbus/TCP协议栈的远程监控系统的设计[J].长江大学学报(自科版),2013,10(7): 50-51.
[6] NXP LPC178X/7X preliminary user manual[EB/OL]. http://www.nxp.com,2011-7-6.
[7] Jean J Labrosse. 嵌入式实时操作系统[M].邵贝贝,译.北京:北京航空航天大学出版社,2003.
[8] 张齐,劳炽元.轻量级协议栈LWIP的分析与改进[J].计算机工程与设计,2010,31(10):2169-2170.
[9] 薛晴.嵌入式实时操作μC/OS-II在LPC1788上的移植及应用[J].电子设计工程,2012,20(5):176-179.
[10] 罗军宏,谢余强,舒辉,等.LwIP在μC/OS II操作系统中的实现[J].微计算机信息,2005,21(7-2):46-48.
[11] Jinjian Jiang.Transplantation Research of the LwIP Agreement under the μC/OS-II[C].5th International Conference on Biomedical Engineering and Information, Chongqing, 2012.
[12] 刘华波,王雪,何文雪,等.组态软件WinCC及其应用[M].北京:机械工业出版社,2009.

相似文献/References:

[1]王树东,孙 野,梁国栋,等.基于LabVIEW的高速数据采集系统设计[J].工业仪表与自动化装置,2014,(04):32.
　WANG Shudong,SUN Ye,LIANG Guodong,et al.Design of the high-speed data acquisition system based on LabVIEW[J].Industrial Instrumentation & Automation,2014,(06):32.
[2]孟文俊a,徐光华a,b,等.基于LabVIEW的滚动轴承非平稳过程监测诊断及性能评估系统的开发[J].工业仪表与自动化装置,2015,(02):18.
　MENG Wenjuna,XU Guanghuaa,b,et al.Development of non-stationary process for rolling bearing fault diagnosis and performance evaluation system based on LabVIEW[J].Industrial Instrumentation & Automation,2015,(06):18.
[3]李 泉,曹 曦,李金明.基于ZigBee的煤矿井下盲区瓦斯信息采集系统设计[J].工业仪表与自动化装置,2015,(03):54.
　LI Quan,CAO Xi,LI Jinming.Design of gas information collection system underground coal mines blind areabased on ZigBee[J].Industrial Instrumentation & Automation,2015,(06):54.
[4]张亚明,高晓丁,刘亚亮,等.基于LabVIEW技术的城市深井供水网水位控制系统设计[J].工业仪表与自动化装置,2015,(03):86.
　ZHANG Yaming,GAO Xiaoding,LIU Yaliang,et al.The design of urban water supply network in deep water level control system based on LabVIEW Technology[J].Industrial Instrumentation & Automation,2015,(06):86.
[5]董明宇,纪文刚,王志俊.基于网络的弧长控制系统[J].工业仪表与自动化装置,2015,(01):27.
　DONG Mingyu,JI Wengang,?WANG Zhijun.Arc length control system based on the network[J].Industrial Instrumentation & Automation,2015,(06):27.
[6]刘荣荣.基于LabVIEW的散热器性能测试系统的设计[J].工业仪表与自动化装置,2016,(01):53.
　LIU Rongrong.The design of radiator performance testing system based on LabVIEW[J].Industrial Instrumentation & Automation,2016,(06):53.
[7]王 博,王昊星,燕 斌,等.用于PLC控制的STM32数据采集系统[J].工业仪表与自动化装置,2016,(03):47.
　WANG Bo,WANG Haoxing,YAN Bin,et al.The STM32 data acquisition module for PLC control system[J].Industrial Instrumentation & Automation,2016,(06):47.
[8]万莉,郑明明,万勇.防喷器试压系统数据采集和控制电路的设计[J].工业仪表与自动化装置,2016,(03):52.
　WAN Li,ZHENG Ming-ming,WAN Yong.Design of Data Acquisition and Control Circuit for Blowout Preventer Pressure Test System[J].Industrial Instrumentation & Automation,2016,(06):52.
[9]蒋乃波,栗永强.多通道混合信号采集分析仪设计[J].工业仪表与自动化装置,2016,(03):104.
　JIANG Naibo,LI Yongqiang.The design of multichannels composite signal acquizition and analyzer instrument[J].Industrial Instrumentation & Automation,2016,(06):104.
[10]荀艳丽,刘 魁.基于Cortex-A8的数据采集监控系统设计[J].工业仪表与自动化装置,2016,(04):85.
　XUN Yanli,LIU Kui.Design of data acquisition monitoring control system based on Cortex-A8[J].Industrial Instrumentation & Automation,2016,(06):85.

备注/Memo

备注/Memo:
收稿日期：2015-03-04
基金项目：北京高校“青年英才计划”项目
作者简介：刘大千（1982），男，河北人，硕士，讲师，研究方向为现场总线与工业以太网技术，物联网技术，过程控制。
更新日期/Last Update: 1900-01-01