|本期目录/Table of Contents|

[1]王一各,董 敏,田 毅.基于LabVIEW和ZigBee的燃料电池监控系统设计[J].工业仪表与自动化装置,2019,(06):40-44.[doi:1000-0682(2019)06-0000-00]
 WANG Yige,DONG Min,TIAN Yi.Design of fuel cell monitoring system based on LabVIEW and ZigBee[J].Industrial Instrumentation & Automation,2019,(06):40-44.[doi:1000-0682(2019)06-0000-00]
点击复制

基于LabVIEW和ZigBee的燃料电池监控系统设计

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:
期数:
2019年06期
页码:
40-44
栏目:
出版日期:
2019-12-15

文章信息/Info

Title:
Design of fuel cell monitoring system based on LabVIEW and ZigBee
作者:
王一各董 敏田 毅
西安工程大学 电子信息学院,西安 710048
Author(s):
WANG YigeDONG MinTIAN Yi
School of Electronic Information, Xi’an Polytechnic University, Xi’an710048,China
关键词:
燃料电池LabVIEWZigBee监控系统无线传输
Keywords:
fuel cell LabVIEW ZigBee monitoring systemwireless transmission
分类号:
TM930.9
DOI:
1000-0682(2019)06-0000-00
文献标志码:
A
摘要:
燃料电池是一种将燃料的化学能转换为电能的化学装置,具有节能环保等诸多优势,为了保证燃料电池高效、平稳、可靠地运行,需要对燃料电池的运行状态进行监控。针对人工监测和有线监测的缺点,提出了基于LabVIEW和ZigBee的燃料电池监控系统,系统以ZigBee模块为核心实现无线传输,上位机通过LabVIEW软件编写。监控系统已经应用于实际工程,试验结果表明,该系统操作方便、运行稳定、高效灵活,能够有效地进行参数配置、指令发送、运行监测、故障报警和数据处理。
Abstract:
Fuel cell is a chemical device that converts the chemical energy of fuel into electric energy.It has many advantages such as energy saving and environmental protection.In order to ensure the efficient,stable and reliable operation of fuel cell,it is necessary to monitor the running state of fuel cell.Aiming at the disadvantages of manual monitoring and wired monitoring,a fuel cell monitoring system based on LabVIEW and ZigBee is proposed.The system realizes wireless transmission with ZigBee module as the core,and the upper computer is programmed by LabVIEW software.The monitoring system has been applied in practical engineering,and the test results show that the system is easy to operate,stable,efficient and flexible,and can effectively configure parameters,send instructions, monitor operation, fault alarm .

参考文献/References:

[1] 邵孟,朱新坚,曹弘飞,等.燃料电池测试实验台的设计与研究[J].电源技术,2017,41(07):994-1000.

[2] 万利,王刚,张祥,等.基于虚拟仪器的DMFC实时监控系统[J].电源技术,2016,40(09):1779-1780.
[3] 董敏,胡红利,王格.基于LabVIEW的无刷直流电机测试系统[J].工业仪表与自动化装置,2018(03):65-68.
[4] 阎群,张明波,余达太.基于LabVIEW的燃料电池电源监控系统设计[J].微计算机信息,2011,27(08):38-40.
[5] GULER H, TURKOGLUI, ATA F. Designing intelligent mechanica ventilator and user interface using LabVIEW[J]. Arabian Journal for Science & Engineering,2014,39(6): 4805-4813.
[6] YAN S,YAN B,et al.The electrical parameters measure- ment system for electrotome output based on LabVIEW[J]. Journal of Biomedical Science & Engineering,2013,6(6): 661-668.
[7] Bar-shalom Y, K Birmiwal.Variable Dimension Filter for Maneuvering Target Tracking[J].IEEE Trans Aero-space & Electronic System,1982,18(5):621-630.
[8] M Mahmoodi,L A James,T Johansen. Automated advanced image processing for micromodel flow experiments; an application using LabVIEW[J].Journal of Petroleum Science and Engineering,2018
[9] 申忠如,郭福田,丁晖.现代测试技术与系统设计[M].西安:西安交通大学出版社,2006:37-42
[10] Patrick Ferrand. GPScan.VI: A general-purpose LabVIEW program for scanning imaging or any application requiring synchronous analog voltage generation and data acquisition [J]. Computer Physics Communications,2015, 192.
[11] 王诚,王树博,张剑波,等.车用燃料电池耐研究[J].化学进展,2015,27(4):424-435.
[12] 曾洪瑜,史翊翔,蔡宁生.燃料电池分布式供能技术发展现状与展望[J].发电技术,2018,39(2):165-170.
[13] 杜忠波,于嘉辉,兴运达,等.基于ZigBee和LabVIEW的家庭智能监控系统的设计[J].辽宁科技学报,2018,20(4): 4-5+3.
[14] 陈欢,秦怀宇,李旋.基于ZigBee技术的温湿度采集系统[J].电子测试,2018(20):9-11.[15] 王超,叶双.基于ZigBee和LabVIEW的智能家居系统设计与实现[J].产业与科技论坛,2018,(6):78-79.?
[16] 周全,封居强,刘阳阳.基于LabVIEW的居民用水数据采集系统研究[J].九江学院学报(自然科学版),2018(3): 58-60.
[17] 李俊娇,朱磊,张晓丹,等.基于LabVIEW的采集数据快速文件存储方[J].西安工程大学学报,2018,32(03): 66-70+78.
[18] 高洁,陈增禄,王宁,等.精确检测电网电压矢量相位角方法的研究[J].西安工程大学学报,2016,30(2):
[19] 贺霞,张敏,朱永灿,等.集中式与组串式逆变器在光伏电站的应用分析[J].西安工程大学学报, 2018(4):443-448.
[20] 徐创,王建成,卫东.基于LabVIEW与CAN总线通信的燃料电池监控系统设计[J].电源技术,2018,42 (07):95-97.
[21] 杨赛风,张建民,崔心水,等.微生物燃料电池阳极氨氮去除的影响因素[J].西安工程大学学报,2016,30(3): 284-289.

相似文献/References:

[1]王树东,孙 野,梁国栋,等.基于LabVIEW的高速数据采集系统设计[J].工业仪表与自动化装置,2014,(04):32.
 WANG Shudong,SUN Ye,LIANG Guodong,et al.Design of the high-speed data acquisition system based on LabVIEW[J].Industrial Instrumentation & Automation,2014,(06):32.
[2]王树东,何 明.关于LabVIEW采集系统的数据存储[J].工业仪表与自动化装置,2014,(05):95.
 WANG Shudong,HE Ming.Acquisition system stored on LabVIEW[J].Industrial Instrumentation & Automation,2014,(06):95.
[3]刘荣荣.基于LabVIEW的自动锯床位置控制系统的设计[J].工业仪表与自动化装置,2014,(06):34.
 LIU Rongrong.The design on the controlled position system of automatic saw on LabVIEW[J].Industrial Instrumentation & Automation,2014,(06):34.
[4]孟文俊a,徐光华a,b,等.基于LabVIEW的滚动轴承非平稳过程监测诊断及性能评估系统的开发[J].工业仪表与自动化装置,2015,(02):18.
 MENG Wenjuna,XU Guanghuaa,b,et al.Development of non-stationary process for rolling bearing fault diagnosis and performance evaluation system based on LabVIEW[J].Industrial Instrumentation & Automation,2015,(06):18.
[5]梁 琛,贾远温,王晓兰.基于LabVIEW的输电线路工频参数测量系统设计[J].工业仪表与自动化装置,2015,(02):26.
 LIANG Chen,JIA Yuanwen,WANG Xiaolan.The design on measure system for transmission lines power frequency parameters based on LabVIEW[J].Industrial Instrumentation & Automation,2015,(06):26.
[6]赵媛媛,陈 捡,王晓侃.基于虚拟仪器的温度检测系统设计[J].工业仪表与自动化装置,2015,(04):38.
 ZHAO Yuanyuan,CHEN Jian,WANG Xiaokan.Design of temperature detection, system based on virtual instruments[J].Industrial Instrumentation & Automation,2015,(06):38.
[7]白 璘,惠 萌,武奇生.城市轨道交通ATP仿真实验装置设计与开发[J].工业仪表与自动化装置,2015,(04):68.
 BAI Lin,HUI Meng,WU Qisheng.Design and development of urban railway ATP stimulation experiment device[J].Industrial Instrumentation & Automation,2015,(06):68.
[8]牟玉喆,潘 鑫,高金吉*,等.基于LabVIEW的不平衡振动信号相位实时提取方法研究[J].工业仪表与自动化装置,2015,(05):17.
 MOU Yuzhe,PAN Xin,GAO Jinji,et al.Research on the phase real-time extraction methods for imbalance vbration signa based on the Labview platform[J].Industrial Instrumentation & Automation,2015,(06):17.
[9]孙茂元,王新兵,左都罗,等.基于LabVIEW的液滴喷射图像采集和分析系统[J].工业仪表与自动化装置,2015,(05):25.
 Sun Maoyuan,Wang Xinbing,Zuo duluo,et al.Liquid droplet jetting image acquisition and analysis system based on Labview[J].Industrial Instrumentation & Automation,2015,(06):25.
[10]刘荣荣.基于LabVIEW的散热器性能测试系统的设计[J].工业仪表与自动化装置,2016,(01):53.
 LIU Rongrong.The design of radiator performance testing system based on LabVIEW[J].Industrial Instrumentation & Automation,2016,(06):53.

备注/Memo

备注/Memo:
收稿日期: 2019-04-10
基金项目:陕西省自然科学基础研究计划(2018JM5137);西安工程大学博士科研启动基金(BS1725)
作者简介:王一各(1992),女,西安市人,助理工程师,研究方向为仪器科学与技术。
更新日期/Last Update: 1900-01-01