|本期目录/Table of Contents|

[1]徐锦程,陈金忠,孟 涛,等.基于STM32和LabVIEW的埋地钢质管道杂散电流检测系统[J].工业仪表与自动化装置,2022,(01):29-35.[doi:10.19950/j.cnki.cn61-1121/th.2022.01.007]
　XU Jincheng,CHEN Jinzhong,MENG Tao,et al.Stray current detection system for buried steel pipeline based on STM32 and LabVIEW[J].Industrial Instrumentation & Automation,2022,(01):29-35.[doi:10.19950/j.cnki.cn61-1121/th.2022.01.007]
点击复制

基于STM32和LabVIEW的埋地钢质管道杂散电流检测系统

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:
期数:
2022年01期
页码:
29-35
栏目:
出版日期:
2022-02-15

文章信息/Info

Title:
Stray current detection system for buried steel pipeline based on STM32 and LabVIEW
文章编号:
1000-0682（2022）01-0000-00
作者:
徐锦程1; 陈金忠2; 孟 涛2; 李晓龙2; 杨绪运2; 何仁洋2; 郭岩宝1
1.中国石油大学（北京） 机械与储运工程学院，北京 102249；
2.中国特种设备检测研究院 压力管道部，北京 100029
Author(s):
XU Jincheng1;  CHEN Jinzhong2;  MENG Tao2;  LI Xiaolong2;  YANG Xuyun2;  HE Renyang2;  GUO Yanbao1
(1.?College of Mechanical and Transportation Engineering, China University of Petroleum(Beijing), Beijing 102249, China;2. Pressure Pipeline Department, China Special Equipment Inspection and Research Institute, Beijing 100029, China)
关键词:
STM32; LabVIEW; 埋地钢质管道; 杂散电流; 检测系统; 采集系统
Keywords:
STM32;  LabVIEW;  buried steel pipeline;  stray current;  detection system;  acquisition system
分类号:
TN98；TG174.3+7
DOI:
10.19950/j.cnki.cn61-1121/th.2022.01.007
文献标志码:
A
摘要:
杂散电流干扰是影响埋地钢质管道安全运行的重要因素。针对现有杂散电流检测设备功能单一，精度不高，配置软件易用性差等问题，设计了一种基于STM32和LabVIEW的埋地钢质管道杂散电流检测系统，能够同时测量多种杂散电流干扰评价指标。该系统由采集系统和上位机两部分组成，采用模块化方式设计采集系统硬件电路，采用LabVIEW软件和MATLAB软件联合编程搭建上位机。实验结果表明，系统测量误差小于0.1%，满足标准要求。该系统具有现场应用推广的可行性。
Abstract:
Stray current interference is an important factor affecting the safe operation of buried steel pipeline. In order to solve the problems of single function, low accuracy and poor software usability of existing stray current detection devices, a stray current detection system for buried steel pipeline based on STM32 and LabVIEW is designed, which can measure multiple stray current interference evaluation indexes simultaneously. The system includes two parts: the acquisition system and the upper computer. The hardware circuit of the acquisition system is designed in a modular way, and the upper computer is built by the combined programming of LabVIEW software and MATLAB software. The experimental results show that the system measurement error is less than 0.1%, which meets the standard requirements. The system has the feasibility of field application and popularization.

参考文献/References:

[1] 李长春,何仁洋,肖勇，等.埋地钢质管道交流杂散电流测试分析方法及评价准则[J].腐蚀与防护,2013,34(07):597–599+648.

[2] CHEN Z, QIN C, TANG J, et al. Experiment research of dynamic stray current interference on buried gas pipeline from urban rail transit [J]. Journal of Natural Gas Science and Engineering,2013,15 : 76 - 81.
[3] PENG X, HUANG Z, CHEN B, et al. On the interference mechanism of stray current generated by DC tram on pipeline corrosion [J]. Engineering Failure Analysis,2020,116 : 104760.
[4] WEN C,LI J,WANG S,et al. Experimental study on stray current corrosion of coated pipeline steel[J]. Journal of Natural Gas Science and Engineering,2015,27(03) : 1555 - 1561.
[5] 董亮,姚知林,葛彩刚,等.地铁杂散电流干扰下管地电位波动特征的傅里叶分析[J].表面技术,2021,50(02):294-303.
[6] 台闯,李博文,郑敏聪,等.SCM-4200交直流杂散电流测量仪研制及应用[J].腐蚀科学与防护技术,2014,26(01):81-85.
[7] 李明,董列武,谢成,等.输油管道杂散电流检测评价与防护实践[J].材料保护,2017,50(02):91-95.
[8] 巴爱叶,邢颂.埋地钢制管道杂散电流的检测与防护技术[J].全面腐蚀控制,2020,34(06):63-66.
[9] 全国锅炉压力容器标准化技术委员会.埋地钢质管道腐蚀防护工程检验：GB/T 19285-2014[S].
[10] 张石磊.音频功率放大器设计与实现[D].长沙:湖南大学,2018.
[11] 窦如凤,井娥林.基于AD620的微弱信号放大器设计[J].仪表技术与传感器,2021(03):45-47+81.
[12] 蔡俊,陈晓烽,吴思汉,等.基于STM32的电机振动信号采集检测系统[J].传感器与微系统,2019,38(11):108-110.
[13] 姚启龙,周攀,江永成.基于STM32的谷物水分在线监测系统设计[J].传感器与微系统,2021,40(06):104-106.
[14]侯志伟,包理群,杜青青.基于STM32的多通道温度测量系统研究与设计[J].工业仪表与自动化装置,2021,(05):50-55.
[15] 邢玉广,张彦军.基于RFID的智能IC卡管理机的设计与研究[J].电子测量技术,2018,41(24):40-45.
[16] 徐涛.基于小波分析和变分模态分解的滚动轴承故障诊断研究[D].北京:北京交通大学,2020.

相似文献/References:

[1]王树东,孙 野,梁国栋,等.基于LabVIEW的高速数据采集系统设计[J].工业仪表与自动化装置,2014,(04):32.
　WANG Shudong,SUN Ye,LIANG Guodong,et al.Design of the high-speed data acquisition system based on LabVIEW[J].Industrial Instrumentation & Automation,2014,(01):32.
[2]王树东,何 明.关于LabVIEW采集系统的数据存储[J].工业仪表与自动化装置,2014,(05):95.
　WANG Shudong,HE Ming.Acquisition system stored on LabVIEW[J].Industrial Instrumentation & Automation,2014,(01):95.
[3]刘荣荣.基于LabVIEW的自动锯床位置控制系统的设计[J].工业仪表与自动化装置,2014,(06):34.
　LIU Rongrong.The design on the controlled position system of automatic saw on LabVIEW[J].Industrial Instrumentation & Automation,2014,(01):34.
[4]孟文俊a,徐光华a,b,等.基于LabVIEW的滚动轴承非平稳过程监测诊断及性能评估系统的开发[J].工业仪表与自动化装置,2015,(02):18.
　MENG Wenjuna,XU Guanghuaa,b,et al.Development of non-stationary process for rolling bearing fault diagnosis and performance evaluation system based on LabVIEW[J].Industrial Instrumentation & Automation,2015,(01):18.
[5]梁 琛,贾远温,王晓兰.基于LabVIEW的输电线路工频参数测量系统设计[J].工业仪表与自动化装置,2015,(02):26.
　LIANG Chen,JIA Yuanwen,WANG Xiaolan.The design on measure system for transmission lines power frequency parameters based on LabVIEW[J].Industrial Instrumentation & Automation,2015,(01):26.
[6]赵媛媛,陈 捡,王晓侃.基于虚拟仪器的温度检测系统设计[J].工业仪表与自动化装置,2015,(04):38.
　ZHAO Yuanyuan,CHEN Jian,WANG Xiaokan.Design of temperature detection, system based on virtual instruments[J].Industrial Instrumentation & Automation,2015,(01):38.
[7]白 璘,惠 萌,武奇生.城市轨道交通ATP仿真实验装置设计与开发[J].工业仪表与自动化装置,2015,(04):68.
　BAI Lin,HUI Meng,WU Qisheng.Design and development of urban railway ATP stimulation experiment device[J].Industrial Instrumentation & Automation,2015,(01):68.
[8]牟玉喆,潘 鑫,高金吉*,等.基于LabVIEW的不平衡振动信号相位实时提取方法研究[J].工业仪表与自动化装置,2015,(05):17.
　MOU Yuzhe,PAN Xin,GAO Jinji,et al.Research on the phase real-time extraction methods for imbalance vbration signa based on the Labview platform[J].Industrial Instrumentation & Automation,2015,(01):17.
[9]孙茂元,王新兵,左都罗,等.基于LabVIEW的液滴喷射图像采集和分析系统[J].工业仪表与自动化装置,2015,(05):25.
　Sun Maoyuan,Wang Xinbing,Zuo duluo,et al.Liquid droplet jetting image acquisition and analysis system based on Labview[J].Industrial Instrumentation & Automation,2015,(01):25.
[10]刘荣荣.基于LabVIEW的散热器性能测试系统的设计[J].工业仪表与自动化装置,2016,(01):53.
　LIU Rongrong.The design of radiator performance testing system based on LabVIEW[J].Industrial Instrumentation & Automation,2016,(01):53.

备注/Memo

备注/Memo:
收稿日期：2021-09-08

基金项目：
国家重点研发计划项目“冬奥用承压设备状态监测及风险预警技术研究”（2019YFF0302202）

作者简介：
徐锦程（1997），男，河南商丘人，硕士研究生，研究方向为油气管道杂散电流检测技术。

通信作者：
何仁洋（1970），男，研究员，研究方向为压力管道完整性技术。
更新日期/Last Update: 1900-01-01