«上一篇/Previous Article|本期目录/Table of Contents|下一篇/Next Article»

《工业仪表与自动化装置》[ISSN:1000-0682/CN:61-1121/TH]

卷:

期数:

2025年02期

页码:

64-68

栏目:

出版日期:

2025-04-15

文章信息/Info

Title:

Development of a domestically produced speed measurement device

文章编号:

1000-0682（2025）02-0064-05

作者:

荣宏伟

（1.核工业理化工程研究院；2.粒子输运与富集技术全国重点实验室，天津 300180）

Author(s):

RONG Hongwei

(1.Nuclear Industry Physical and Chemical Engineering Research Institute, Tianjin 300180, China; 2.National Key Laboratory of Particle Transport and Separation Technology, Tianjin 300180, China)

关键词:

转速; 国产化; 低功耗

Keywords:

rotational speed;  localization;  low power consumption

分类号:

TH-3TP273

DOI:

10.19950/j.cnki.CN61-1121/TH.2025.02.012

文献标志码:

A

摘要:

针对现有转速测量装置核心芯片依赖进口、硬件设计复杂、功耗较高等问题，研制了一种集信号采集、测量、显示于一体的转速测量装置，主要包括主控模块、供电模块和显示模块，通过对各模块的国产芯片选型、测试与考核，实现其核心芯片100%国产化设计，解决了进口芯片管控限制、采购困难的问题，并针对该转速测量装置提出了一种低功耗管理机制，装置可根据当前运行状态进行模式切换，自动运行至最佳的功耗管理状态，以降低整功耗。测试表明，与现有技术相比，该转速测量装置整机功耗降低了42.5%，达到单次充电续航14.5小时。

Abstract:

A speed measurement device that integrates signal acquisition, measurement, and display was developed to address the issues of the existing speed measurement device’s core chip dependence on imports, complex hardware design, and high power consumption. The device mainly includes a main control module, a power supply module, and a display module. Through the selection, testing, and assessment of domestic chips for each module, the 100% localization design of its core chip was achieved, solving the problems of import chip control restrictions and procurement difficulties. A low-power management mechanism was proposed for the speed measurement device, which can switch modes according to the current operating status and automatically operate to the optimal power management state to reduce overall power consumption. Tests have shown that compared to existing technologies, the power consumption of the speed measurement device has been reduced by 42.5%, achieving a single charging range of 14.5 hours.

参考文献/References:

[1] 张淦,王海彬,黄媛婷,等.引信微弱信号降噪箕舌线最小均方误差变步长算法[J].探测与控制学报,2023,45(02):1-10
[2] 陈皓,米海波,王一婷,等.一种信号处理电路传导抗扰测试分析[J].电子制作,2023,31(05):101-105.
[3] 魏莉,杜锦铭,包伟华.1151压力变送器信号处理板老化测试装置设计与开发[J].中国仪器仪表,2022(08):74-78.
[4] 周登科,杨颖.基于深度学习的指针式仪表倾斜校正方法[J].计算机辅助设计与图形学学报,2020,32(12):1976-1984.
[5] MA Z, HUANG Q, XU Q, et al. Permeable superelastic liquid-metal fibre mat enables biocompatible and monolithic stretchable electro-nics[J]. Nat Mater, 2021, 20(6): 859–868.
[6] LIU L,LU Y,ZHUANG X,et al. Noise analysis in pre-am-plifier circuits associated to highly sensitive opticallypumped magnetometers for geomagnetic applications[J]. Applied Sciences,2020,10( 20) :7172.
[7] LEE J,MIN K,RYU K,et al. Space plasma detectors on NEXTSat-1 for ionospheric measur-ements[J]. Journal of the Korean Physical Society,2018,72( 11):1393－1401.

相似文献/References:

[1]孙晓明,吴 震,宋宝宁.PLC电机转速测量系统设计与实现[J].工业仪表与自动化装置,2015,(01):25.
　SUN Xiaoming,WU Zhen,SONG Baoning.The design and implementation of PLC motor speed measurement system[J].Industrial Instrumentation & Automation,2015,(02):25.
[2]郭晓光,钱宏文,李星辉,等.航空机载智能接触器自动测试平台设计[J].工业仪表与自动化装置,2023,(05):12.[doi:10.19950/j.cnki.cn61-1121/th.2023.05.003]
　GUO Xiaoguang,QIAN Hongwen,LI Xinghui,et al.The automatic test platform design for smart contactors in the aviation system[J].Industrial Instrumentation & Automation,2023,(02):12.[doi:10.19950/j.cnki.cn61-1121/th.2023.05.003]
[3]刘荆飞,任宝利,廖中亮,等.基于国民技术MCU全国产测温模块设计[J].工业仪表与自动化装置,2024,(01):25.[doi:DOI:10.19950/j.cnki.CN61-1121/TH.2024.01.006]
　LIU Jingfei,REN Baoli,LIAO Zhongliang,et al.Design of domestic production temperature measurement module based onnational technology MCU[J].Industrial Instrumentation & Automation,2024,(02):25.[doi:DOI:10.19950/j.cnki.CN61-1121/TH.2024.01.006]

备注/Memo

备注/Memo:

收稿日期：2024-07-09第一作者：荣宏伟（1990—），男，硕士研究生，工程师，主要从事自动化仪表研发设计工作。E-mail: 1471669021@qq.com

常用功能

更新日期/Last Update: 1900-01-01